Microsoft 77-884 examen pratique questions et réponses

Le produit de Pass4Test peut assurer les candidats à réussir le test Microsoft 77-884 à la première fois, mais aussi offrir la mise à jour gratuite pendant un an, les clients peuvent recevoir les ressources plus nouvelles. Pass4Test n'est pas seulement un site, mais aussi un bon centre de service.

Pas besoin de beaucoup d'argent et de temps, vous pouvez passer le test Microsoft 77-884 juste avec la Q&A de Microsoft 77-884 offerte par Pass4Test qui vous offre le test simulation bien proche de test réel.

Un bon choix de l'outil à se former est le point essentiel à passer le test Microsoft 77-884, et les documentations à propos de rechercher le test Microsoft 77-884 est toujours une part plus importante pendant la préparation de test Certification. Les Q&As offertes par les experts de Pass4Test sont presque même que les tests réels. Pass4Test est un site web particulièrement en apportant les facilités aux gens qui veulent passer le test Certification.

Le Certificat de Microsoft 77-884 peut vous aider à monter un autre degré de votre carrière, même que votre niveau de vie sera amélioré. Avoir un Certificat Microsoft 77-884, c'est-à-dire avoir une grande fortune. Le Certificat Microsoft 77-884 peut bien tester des connaissances professionnelles IT. La Q&A Microsoft 77-884 plus nouvelle vient de sortir qui peut vous aider à faciilter le cours de test préparation. Notre Q&A comprend les meilleurs exercices, test simulation et les réponses.

Vous pouvez tout d'abord télécharger le démo Microsoft 77-884 gratuit dans le site Pass4Test. Une fois que vous décidez à choisir le Pass4Test, Pass4Test va faire tous efforts à vous permettre de réussir le test. Si malheureusement, vous ne passez pas le test, nous allons rendre tout votre argent.

Pass4Test a une grande équipe composée des experts d'expérience dans l'industrie IT. Leurs connaissances professionnelles et les recherches font une bonne Q&A, qui vous permet à passer le test Microsoft 77-884. Dans Pass4Test, vous pouvez trouver une façon plus convenable à se former. Les resources de Pass4Test sont bien fiable. Choisissez Pass4Test, choisissez un raccourci à réussir le test Microsoft 77-884.

Code d'Examen: 77-884
Nom d'Examen: Microsoft (Microsoft Office Outlook 2010 Practice Test)
Questions et réponses: 225 Q&As

77-884 Démo gratuit à télécharger: http://www.pass4test.fr/77-884.html

NO.1 It will include holidays of the United Kingdom.
A.
Answer: A

Microsoft   certification 77-884   77-884 examen   certification 77-884   77-884 examen   certification 77-884
4.Kevin works as a Support Analyst for White Well Inc. He uses Microsoft Outlook 2010 for messaging
and e-mailing. MS Outlook has been configured to use an IMAP account. He creates a task request and
sends it to multiple recipients. He wants to send an informative e-mail that gives information about the
start date, due date, subject, priority, actual work, status, etc about the task request. He has to click an
option in the task window. Mark the option that he will use to accomplish the task.
A.
Answer: A

Microsoft examen   77-884 examen   77-884   77-884 examen
5.You work as a System Analyst for InfoTech Inc. You create a meeting request to invite several
attendees for a meeting. Now you want to ensure that you do not receive any response from attendees
indicating whether they plan to attend the meeting or not. For this, you have to click an option on the
Meeting tab.
Mark the button on the Meeting tab to set the meeting response options.
A.
Answer: A

Microsoft   certification 77-884   certification 77-884   certification 77-884
6.Choose and reorder the required steps to create a rule that will apply high importance to all emails that
satisfy the following criteriA.
1. Send email from peter@InfoTech.com account.
2. The sent emails must contain the "Meeting" word in the subject field.
NotE. The rule must omit the emails that are flagged as "Do not Forward".
A.
Answer: A

Microsoft   77-884   77-884   certification 77-884
7.Choose and reorder the steps required to create a calendar group named 'Employee' that includes
Employees contact group, and contacts named Henry Stuart, Mike Wilson, and Patricia.
A.
Answer: A

Microsoft   77-884   77-884
8.Mark works as a Support Analyst for White Well Inc. He uses Microsoft Outlook for scheduling
meetings and e-mailing. MS Outlook has been configured to use a POP3 account. He wants to
create a recurring appointment that satisfies the following criteriA.
1. It will start at 12:00 AM and end at 12:40 AM.
2. It will recur from 17th Dec to 27th Dec.
3. It will recur on every Monday, Tuesday, Saturday, and Wednesday.
Perform the appropriate actions in the Recurrence dialog box to make the appointment recurring.
A.
Answer: A

certification Microsoft   certification 77-884   77-884   certification 77-884   certification 77-884
9.Derek works as a Marketing Manager for Blue Well Inc. Derek is using Microsoft Outlook 2010 for
messaging and e-mailing. MS Outlook has been configured to use the Derek@InfoTech email account.
In Outlook 2010, e-mail messages in his Inbox are organized by Date, and are arranged by
Conversation. Outlook groups messages that share the same subject into conversations that can be
viewed, expanded, or collapsed.
Mark the option or button on the Home tab to remove and send all previous and future e-mail
message conversations related to the Sales Details email directly to the Deleted Items folder.
A.
Answer: A

Microsoft examen   77-884 examen   77-884   77-884   77-884 examen
10.Mark works as a System Analyst for InfoTech Inc. He uses Microsoft Outlook 2010 for messaging and
e-mailing. MS Outlook has been configured to use an Exchange account.
He wants to create a quick step named FwD.emp, so that he can quickly and easily manage his mailbox
by using the shortcut key combination Ctrl + Shift + F9. He wants the following actions to be automated by
the quick step:
1. A reply via an e-mail to employees@InfoTech.com with a high importance meeting request.
2. Send an e-mail with the Subject: URGENT MEETING.
3. Send an e-mail with the Location: San Fransisco.
4. Send an e-mail with the text: "Meeting with Latest Updates on Sales".
5. Send an e-mail with a small "hover box" containing the following information about the
item being hovered over:
"This quick step will reply to this email with a meeting request to all members"
Which actions will he perform in the Edit Quick Step dialog box to create the quick step?
A.
Answer: A

Microsoft   77-884   77-884 examen   certification 77-884

NO.2 You work as a Support Analyst for White Well Inc. You are using Microsoft Outlook for messaging and
e-mailing. MS Outlook has been configured to use an Exchange account. You are composing a message
that contains security related information of the company. You want to configure Outlook in such a way
that it will accomplish the following tasks:
1. It returns a receipt that tells you that a message was opened.
2. It returns a message notification in your Inbox that the e-mail message was delivered to
the recipient's mailbox.
3. It returns a message notification in your Inbox that tells whether the recipient has seen it
or read it.
4. The message should be delivered by 22nd Dec 2011 at 5 pm.
5. The message should be expired by 25th Dec 2011 at 5 pm.
Perform the appropriate actions in the following Properties dialog box to configure the message delivery
options.
A.
Answer: A

Microsoft   77-884 examen   77-884

NO.3 Peter works as a Support Analyst for White Well Inc. He uses Microsoft Outlook 2010 business cards
to save the contact information of an identity. MS Outlook has been configured to use a POP3 account.
Peter opens the contact, and he wants to send his business card to other users in such a way that only
the .vcf file of the contact will be available to the recipients. Which of the following actions will he take to
accomplish the task?
A. Send the business card in the Internet format.
B. Send the business card in the plain-text format.
C. Send the business card in the Business Card format.
D. Send the business card in the PDF format.
Answer: A

certification Microsoft   77-884   77-884 examen   certification 77-884   certification 77-884

NO.4 The users are allowed to suggest new meeting time.

NO.5 You use Microsoft Outlook 2010 for messaging and e-mailing. MS Outlook has been configured to use
an IMAP account. You compose an e-mail. The e-mail comprises some confidential information. You
want to ensure that the recipients of the e-mail see the "Please treat this as Confidential" message in
the Information Bar of the e-mail. Which of the following actions will you take to accomplish the task?
A. Change the importance level.
B. Assign a Flag.
C. Use RSS Feeds.
D. Change the sensitivity level.
Answer: D

certification Microsoft   certification 77-884   77-884   77-884

NO.6 Choose and reorder the required steps to create a rule that will apply high importance to all emails that
satisfy the following criteriA.
1. Send email from peter@InfoTech.com account.
2. The sent emails must contain the "Meeting" word in the subject field.
NotE. The rule must omit the emails that are flagged as "Do not Forward".
A.
Answer: A

Microsoft   77-884 examen   77-884   certification 77-884   77-884 examen

NO.7 David works as a Support Analyst for White Well Inc. He uses Microsoft Outlook for messaging and
e-mailing. MS Outlook has been configured to use an IMAP account. He wants to print the calendar that
comprises the details of a single month. He wants to ensure that the calendar acquires the following
properties:
1. In its layout, it prints two pages.
2. It prints the details from 9 A.M. to 5 P.M.
3. The paper source of the paper in the Manual Paper Feed.
4. Orientation landscape.
5. Reverse the position of the right and left section of the header and footer so that the
information in the left section on an even page is printed in the right section on an odd
page.
6. The size is sheet booklet.
What actions will he take in the Page Setup dialog box to accomplish the task?
A.
Answer: A

certification Microsoft   certification 77-884   certification 77-884   certification 77-884   certification 77-884   77-884 examen

NO.8 David works as a Support Analyst for White Well Inc. He uses Microsoft Outlook 2010's business card
to save contacts information. MS Outlook has been configured to use an Exchange account. He includes
two business cards in an e-mail message to send the contact information about the suppliers to Mr.
Thompson and Mr. Jackson.
By using the business cards, David will visually communicate the corporate and personal identity of the
suppliers. He sends the e-mail message. However, the recipient of the e-mails receives the cards that are
only images and are non-clickable. They also receive an attached .vcf file that contains the information
about the contact. Which of the following is a cause of the issue?
A. Recipients are using HTML text format to view the e-mail.
B. Business Cards are added as an e-mail signature
C. Recipients are using Outlook 2010.
D. Recipients are using plain text format to view the e-mail.
Answer: A

Microsoft examen   77-884   77-884 examen

NO.9 The response type while proposing a meeting must be Accept.

NO.10 Add a signature named Product_Manager to any new email message.
Perform the appropriate actions in the following Signatures and Stationery dialog box to accomplish the
task.
A.
Answer: A

Microsoft examen   77-884 examen   77-884   certification 77-884
3.Configure the following calendar settings in the Outlook Options dialog box.
1. The work week of the calendar will be Monday to Friday, and the working hours of the calendar will be
10 A.M. to 5 P.M.
2. First day of the week will be Wednesday.
3. On the server, it will share the calendar information of 5 months.

NO.11 Choose and reorder the required steps to set Outlook 2010 as your default program, so that the e-mail
applications on your computer can use Outlook 2010.
A.
Answer: A

Microsoft   77-884   77-884   77-884   77-884 examen

NO.12 David works as a Support Analyst for White Well Inc. He uses Microsoft Outlook for scheduling
meetings and e-mailing. MS Outlook has been configured to use a POP3 account. David has scheduled a
business meeting that will occur regularly on 10 A.M. from July 30, 2008 to Sept 15, 2008.
Due to some other meetings, David wants to change the time of the business meeting that is going to be
held on Aug 27, 2008. He wants to set the meeting time to 3 P.M.
Choose and reorder the required steps to update the meeting occurrence.
A.
Answer: A

Microsoft   77-884   77-884   certification 77-884

NO.13 You work as a Support Analyst for Soft Well Inc. You are using Microsoft Outlook 2010 for messaging
and emailing. MS Outlook has been configured to use an IMAP account. Your colleague Mark Smith
belongs to a social network site that you also use.
You want to see his status updates, comments, messages, and alerts from the social network sites, all in
one location in Outlook 2010. Mark the option in the following image that you will use to see a list of all
email items that you share with Mark, such as e-mail messages you have exchanged, attachments, and
meetings.
A.
Answer: A

certification Microsoft   certification 77-884   77-884   77-884   77-884   77-884

NO.14 The default reminder will be of 30 minutes.

NO.15 Mark works as a Marketing Manager for InfoTech Inc. He uses Microsoft Outlook 2010 for messaging
and emailing. MS Outlook has been configured to use the mark@radiant.com account. In Microsoft
Outlook 2010, a signature will automatically be added to the e-mails. However, Mark wants Outlook to
perform the following actions automatically: .?
1. Use the mark@InfoTech.com account.
2. Add a signature named Marketing_Manager to any message that Mark replies to or forwards.

NO.16 The server will update the availability information in every 20 minutes.

NO.17 First week of the year must be the first full week.

NO.18 You work as a Support Analyst for White Well Inc. You are using Microsoft Outlook for messaging and
e-mailing. MS Outlook has been configured to use an Exchange account. You are composing a message
that contains security related information of the company. You want to configure Outlook in such a way
that it will accomplish the following tasks:
1. It returns a receipt that tells you that a message was opened.
2. It returns a message notification in your Inbox that the e-mail message was delivered to
the recipient's mailbox.
3. It returns a message notification in your Inbox that tells whether the recipient has seen it
or read it.
4. The message should be delivered by 22nd Dec 2011 at 5 pm.
5. The message should be expired by 25th Dec 2011 at 5 pm.
Perform the appropriate actions in the following Properties dialog box to configure the message delivery
options.
A.
Answer: A

Microsoft examen   certification 77-884   77-884   77-884   certification 77-884

NO.19 Peter works as a Support Analyst for White Well Inc. He uses Microsoft Outlook 2010 for messaging
and e-mailing. MS Outlook has been configured to use a POP3 account. Peter uses his business cards to
send the contact information about him. He wants to ensure that the pictures in the business cards take
50% area of the card so that they look clearer, as shown in the following images:
A.
Answer: A

Microsoft   certification 77-884   77-884   77-884 examen

NO.20 The Arabic calendar is used as an alternative calendar in the Gregorian language.

Le produit de Pass4Test que vous choisissez vous met le pied sur la première marche du pic de l'Industrie IT, et vous serez plus proche de votre rêve. Les matériaux offerts par Pass4Test peut non seulement vous aider à réussir le test Microsoft 77-884, mais encore vous aider à se renforcer les connaissances professionnelles. Le service de la mise à jour pendant un an est aussi gratuit pour vous.

Le dernier examen Microsoft 98-366 gratuit Télécharger

Pass4Test est un bon catalyseur du succès pour les professionnels IT. Beaucoup de gens passer le test Microsoft 98-366 avec l'aide de l'outil formation. Les experts profitent leurs expériences riches et connaissances à faire sortir la Q&A Microsoft 98-366 plus nouvelle qui comprend les exercices de pratiquer et le test simulation. Vous pouvez passer le test Microsoft 98-366 plus facilement avec la Q&A de Pass4Test.

Dans l'Industrie IT, le certificat IT peut vous permet d'une space plus grande de se promouvoir. Généralement, la promotion de l'entreprise repose sur ce que vous avec la certification. Le Certificat Microsoft 98-366 est bien autorisé. Avec le certificat Microsoft 98-366, vous aurez une meilleure carrière dans le future. Vous pouvez télécharger tout d'abord la partie gratuite de Q&A Microsoft 98-366.

Code d'Examen: 98-366
Nom d'Examen: Microsoft (MTA Networking Fundamentals)
Questions et réponses: 270 Q&As

Les produits de Pass4Test sont préparés pour le test Certification Microsoft 98-366, y compris les formations et les informations ciblées au test Microsoft 98-366. D'ailleurs, la Q&A de Pass4Test qui est impressionnée par la grande couverture des questions et la haute précision des réponses vous permet à réussir le test avec une haute note.

Pass4Test a capacité d'économiser vos temps et de vous faire plus confiant à réussir le test. Vous pouvez télécharger le démo Microsoft 98-366 gratuit à connaître mieux la bonne fiabilité de Pass4Test. Nous nous font toujours confiant sur nos produits, et vous aussi dans un temps proche. La réussite de test Microsoft 98-366 n'est pas loin de vous une fois que vous choisissez le produit de Pass4Test. C'est un choix élégant pour vous faciliter à réussir le test Microsoft 98-366.

Vous allez choisir Pass4Test après essayer une partie de Q&A Microsoft 98-366 (gratuit à télécharger). Le guide d'étude produit par Pass4Test est une assurance 100% à vous aider à réussir le test Certification Microsoft 98-366.

98-366 Démo gratuit à télécharger: http://www.pass4test.fr/98-366.html

NO.1 Which of the following utilities will produce the output as shown in the image below?
A. NBTSTAT
B. IPCONFIG
C. PING
D. NETSTAT
Answer: B

Microsoft   certification 98-366   98-366 examen   98-366   98-366

NO.2 Identify whether the given statement is true or false.
"In a segmented network, the router prevents broadcasts from being transferred from one
segment to another."
A. True
B. False
Answer: A

Microsoft   certification 98-366   98-366

NO.3 Which of the following standards uses twisted pair cabling?
A. 10Base5
B. 10BaseT
C. 100BaseSX
D. 100BaseFX
Answer: B

Microsoft   98-366   certification 98-366   98-366

NO.4 Identify whether the given statement is true or false.
"In a bus topology, when a computer transmits its data, the signals travel in both directions on the bus
until they reach both ends."
A. False
B. True
Answer: B

certification Microsoft   98-366   98-366 examen   98-366

NO.5 Which of the following cables offers more resistance to crosstalk than the other cables?
A. Unshielded twisted pair
B. Fiber-optic
C. Coaxial
D. Shielded twisted pair
Answer: B

Microsoft examen   98-366   98-366

NO.6 You work as a Network Administrator for Tech Perfect Inc. The company has a TCP/IP-based routed
network. The network is configured on Cisco devices. The network is configured as shown in the image
below:
Following is a list of the types of cable used in networking:
Which of the following options is correct regarding the types of cable used for connecting different
networking devices on the network?
A. A-4, B-3, C-2, D-1
B. A-3, B-1, C-1, D-4
C. A-1, B-2, C-3, D-4
D. A-2, B-1, C-4, D-3
Answer: B

Microsoft   98-366   98-366

NO.7 Which of the following services is required in a routed network to communicate with the DHCP
server on another segment?
A. DHCP
B. RIS
C. DNS
D. DHCP relay agent
E. WINS
Answer: D

Microsoft   98-366 examen   98-366 examen   98-366 examen

NO.8 The ____ layer provides access to the network for applications and certain user functions. It
displays incoming information and prepares outgoing information for network access.
A. Transport
B. Network
C. Physical
D. Session
E. Data-link
F. Application
Answer: F

certification Microsoft   98-366   certification 98-366   98-366

NO.9 You work as a Network Administrator for McNeil Inc. The company has a TCP/IP-based network. You
are configuring an Internet connection for your company. Your Internet service provider (ISP) has a
UNIX-based server. Which of the following utilities will enable you to access the UNIX server, using a
text-based connection?
A. TELNET
B. TRACERT
C. IPCONFIG
D. FTP
E. PING
Answer: A

Microsoft   98-366   certification 98-366   certification 98-366   98-366

NO.10 Which of the following functions is not performed by a router?
A. Internetwork communication
B. Broadcast forwarding
C. Packet filtering
D. Packet switching
Answer: B

Microsoft   98-366 examen   certification 98-366   certification 98-366   98-366 examen

NO.11 You work as a Web Designer for Blue Well Inc. You have to create a Web site for the company. The
Web site will be for internal use only and will contain information about policies and procedures of the
company. What will be the scope of the Web site?
A. Extranet
B. Internet
C. Utilitarian
D. Intranet
Answer: D

certification Microsoft   98-366   98-366 examen

NO.12 Which of the following devices is required for remotely accessing the network through PSTN lines?
A. Hub
B. Bridge
C. Switch
D. Modem
E. Gateway
F. Router
Answer: D

Microsoft   98-366   98-366   certification 98-366

NO.13 You work as a consultant for Tech Perfect Inc. You are required to design a gigabit network for the
company. Which of the following types of cables will you use for the network?
A. CAT 3
B. CAT 4
C. CAT 5
D. CAT 6
Answer: D

Microsoft examen   98-366   98-366   98-366   98-366

NO.14 Which of the following statements is true regarding VLAN?
A. It increases the number of interfaces available to the network.
B. It is applied in case of RIP routing.
C. It configures permissions across the network.
D. It enables the user to map port number.
Answer: A

Microsoft   98-366   98-366 examen

NO.15 You work as a Network Administrator for Tech Perfect Inc. The company has a TCP/IP-based network.
You are required to set up a new network in a department named Research. The department's network
will be configured with IPv6.
Place the appropriate properties of the IPv6 multicast address structure in the image below.
A.
Answer: A

Microsoft examen   certification 98-366   certification 98-366   98-366   98-366 examen

NO.16 Which of the following utilities will produce the output as shown in the image below?
A. PING
B. NETSTAT
C. TRACERT
D. NBTSTAT
Answer: A

certification Microsoft   98-366 examen   98-366   98-366

NO.17 Which of the following types of patch cable is used in a 100BaseT network?
A. Cat 3 STP
B. Cat 3 UTP
C. RJ 58 Coaxial
D. Cat 5 UTP
Answer: D

Microsoft examen   98-366 examen   certification 98-366

NO.18 You work as a Network Administrator for McNeil Inc. The company has a TCP/IP-based network. The
company's office has an ISDN connection. This connection is used to connect the network to the Internet.
How many channels does an ISDN BRI connection use to send data?
A. 2
B. 4
C. 6
D. 1
Answer: A

Microsoft   98-366   98-366   certification 98-366

NO.19 You work as a technician for Net Perfect Inc. You are troubleshooting a connectivity issue on a
network. You are using the ping command to verify the connectivity between two hosts. You want ping to
send larger sized packets than the usual 32-byte ones. Which of the following commands will you use?
A. ping -a
B. ping -4
C. ping -l
D. ping -t
Answer: C

Microsoft examen   98-366   certification 98-366

NO.20 Which of the following is a function of a WINS server on a network?
A. Assigning virtual memory to the server.
B. Assigning IP addresses.
C. Converting host names to domain names.
D. Converting NetBIOS names to IP addresses.
E. Assigning computer names.
Answer: D

Microsoft examen   certification 98-366   98-366   98-366

NO.21 PRI, a form of ISDN, can provide transmission rates of up to ____.
A. 1.544Mbps
B. 16Kbps
C. 128Kbps
D. 64Kbps
Answer: Pending

Microsoft   certification 98-366   98-366   98-366

NO.22 In the FDDI network, each network node is connected to a central cabling nexus called a ____.
A. Concentrator
B. Gateway
C. Repeater
D. Transceiver
E. NIC
F. Bridge
Answer: A

certification Microsoft   98-366   certification 98-366   98-366 examen   certification 98-366

NO.23 You work as a Network Administrator for McRobert Inc. Your company has a TCP/IP-based network.
You want to know the statistics of each protocol installed on your computer. Which of the following
commands will you use?
A. NETSTAT -r
B. NBTSTAT -s
C. NBTSTAT -r
D. NETSTAT -s
Answer: Pending

Microsoft   certification 98-366   98-366

NO.24 Which of the following statements is true regarding hybrid network topology?
A. It is a combination of more than two similar networks connected through routers.
B. It is a combination of two or more similar types of networks connected through a bridge de vice.
C. It is a combination of two or more different types of networks topologies.
D. It is a network that uses both coaxial and CAT 5 cabling.
Answer: D

Microsoft   98-366   certification 98-366   certification 98-366   98-366

NO.25 Which of the following devices is used to create VLANs in a small network?
A. Switch
B. Bridge
C. Hub
D. Repeater
Answer: A

Microsoft   certification 98-366   98-366

NO.26 Which of the following are functions of the application layer of the OSI model?
Each correct answer represents a complete solution. Choose three.
A. To provide a user interface for database services
B. To provide protocols for service use
C. To provide protocols for service advertisement
D. To provide file, print, and message services
Answer: B,C,D

Microsoft examen   98-366   98-366   certification 98-366   98-366

NO.27 You work as a Web Developer for WebCrunch Inc. You create a web site that contains information
about the company's products and services. The web site is to be used by the company's suppliers only.
Which of the following options will you use to specify the nature of access to the web site?
A. Intranet
B. Internet
C. Internet and Intranet
D. Extranet
Answer: D

certification Microsoft   98-366 examen   certification 98-366

NO.28 Which of the following statements are true about a UTP crossover cable with RJ-45 connectors?
Each correct answer represents a complete solution. Choose two.
A. It is used for establishing a connection between a telephone line and a modem.
B. It is used for troubleshooting a network card.
C. It is used for establishing a connection between a broadband modem and a PC/router.
D. It is used for establishing a connection between two PCs without a hub.
Answer: C,D

certification Microsoft   certification 98-366   98-366   98-366   certification 98-366

NO.29 Identify whether the given statement is true or false.?
"A switch passes data based on the MAC address."
A. True
B. False
Answer: A

Microsoft examen   certification 98-366   98-366   98-366 examen   certification 98-366   98-366 examen

NO.30 Which of the following items are configured on a user workstation for wireless networking?
Each correct answer represents a complete solution. Choose two.
A. MAC Address Filtering
B. Service Set Identifier (SSID)
C. Encryption
D. Security Set Identifier (SSID)
Answer: B,C

Microsoft   98-366   98-366   98-366 examen   98-366

Si vous faites toujours la lutte contre le test Microsoft 98-366, Pass4Test peut vous aider à résoudre ces difficultés avec ses Q&As de qualité, et atteindre le but que vous avez envie de devenir un membre de Microsoft 98-366. Si vous avez déjà décidé à s'améliorer via Microsoft 98-366, vous n'avez pas aucune raison à refuser Pass4Test. Pass4Test peut vous aider à passer le test à la première fois.

Le plus récent matériel de formation Microsoft 70-503-Csharp

But que Pass4Test n'offre que les produits de qualité est pour vous aider à réussir le test Microsoft 70-503-Csharp 100%. Le test simulation offert par Pass4Test est bien proche de test réel. Si vous ne pouvez pas passer le test Microsoft 70-503-Csharp, votre argent sera tout rendu.

Pass4Test est un site d'offrir la bonne Q&A Microsoft 70-503-Csharp. Le produit offert par Pass4Test peut vous aider à réussir ce test très difficile. Si vous ajoutez le produit au panier, vous allez économiser le temps et l'effort. Le produiti Pass4Test est bien réputé dans l'Idustrie IT.

Participer au test Microsoft 70-503-Csharp est un bon choix, parce que dans l'Industire IT, beaucoup de gens tirent un point de vue que le Certificat Microsoft 70-503-Csharp symbole bien la professionnalité d'un travailleur dans cette industrie.

Selon les feedbacks les professionnels bien réputés dans l'Industrie IT, Pass4Test est un bon catalyseur de leurs succès. L'outil de formation offert par Pass4Test leur aide d'économiser le temps et l'argent, le plus important est qu'ils aient passé le test Microsoft 70-503-Csharp avec succès. Pass4Test est un fournissur fiable. Vous allez réaliser votre rêve avec l'aide de Pass4Test.

Dans cette société bien intense, c'est avantage si quelque'un a une technique particulère, donc c'est pourquoi beaucoup de gens ont envie de dépnenser les efforts et le temps à préparer le test Microsoft 70-503-Csharp, mais ils ne peuvaient pas réussir finalement. C'est juste parce que ils ont pas bien choisi une bonne formation. L'outil de formation lancé par les experts de Pass4Test vous permet à passer le test Microsoft 70-503-Csharp coûtant un peu d'argent.

Code d'Examen: 70-503-Csharp
Nom d'Examen: Microsoft (TS: MS.NET Frmwrk 3.5, Wndws Commun Fndtion App Dev)
Questions et réponses: 75 Q&As

Pass4Test a une grande équipe composée des experts d'expérience dans l'industrie IT. Leurs connaissances professionnelles et les recherches font une bonne Q&A, qui vous permet à passer le test Microsoft 70-503-Csharp. Dans Pass4Test, vous pouvez trouver une façon plus convenable à se former. Les resources de Pass4Test sont bien fiable. Choisissez Pass4Test, choisissez un raccourci à réussir le test Microsoft 70-503-Csharp.

70-503-Csharp Démo gratuit à télécharger: http://www.pass4test.fr/70-503-Csharp.html

NO.1 You create a Windows Communication Foundation service by using Microsoft .NET Framework 3.5.
You write the following code segment. (Line numbers are included for reference only.)
01 [ServiceContract(SessionMode=SessionMode.Required)]
02 public interface IOrderManager
03 {
04
05 void CloseOrder();
06 }
You need to decorate the operation as the method that closes the current session.
Which code segment should you insert at line 04?
A. [OperationContract(IsInitiating=false)]
B. [OperationContract(IsTerminating=true)]
C. [OperationContract]
[OperationBehavior(ReleaseInstanceMode=
ReleaseInstanceMode.AfterCall)]
D. [OperationContract(IsTerminating=false)]
[OperationBehavior(ReleaseInstanceMode=
ReleaseInstanceMode.AfterCall)]
Answer: B

Microsoft   70-503-Csharp   certification 70-503-Csharp   70-503-Csharp

NO.2 smb.HttpGetUrl=mexAddress;

NO.3 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5. The service will expose a method named DoProcess to the client applications.
You write the following code segment. (Line numbers are included for reference only.)
01 [ServiceContract]
02 public interface IMyService
03 {
04
05 }
You need to ensure that the client applications are not required to obtain results from the DoProcess
method.
Which code segment should you insert at line 04?
A. [OperationContract(IsOneWay=true)]
bool DoProcess();
B. [OperationContract(IsOneWay=true)]
void DoProcess();
C. [OperationContract(AsyncPattern=false)]
bool DoProcess();
D. [OperationContract(AsyncPattern=false)]
void DoProcess();
Answer: B

Microsoft examen   certification 70-503-Csharp   70-503-Csharp examen   70-503-Csharp   certification 70-503-Csharp

NO.4 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework

NO.5 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
You write the following code segment.
namespace MyServices
{
[ServiceContract()]
interface IManageOrders
{
...
}
}
The service metadata must be exposed at the relative address named meta.
You need to add an endpoint element to the app.config file of the service host.
Which code fragment should you add?
A. <endpoint address="meta" binding="wsHttpBinding"
contract="IManageOrders" />
B. <endpoint address="meta" binding="wsHttpBinding"
contract="MyServices.IMetadataExchange" />
C. <endpoint address="meta" binding="mexHttpBinding"
contract="IMetadataExchange" />
D. <endpoint address="meta" binding="mexHttpBinding"
contract="MyServices.IManageOrders" />
Answer: C

Microsoft   70-503-Csharp   70-503-Csharp examen   certification 70-503-Csharp

NO.6 When you browse to the base address of the service, you receive the following message: "Metadata
publishing for this service is currently disabled."
You debug the code and discover that the ServiceMetadataBehavior behavior was previously nonexistent.
You need to enable metadata publishing.
What should you do?
A. Delete lines 15 and 16.
B. Modify the code segment at line 03 in the following manner.
Uri mexAddress=new Uri("/service");
C. Insert the following code segment at line 11.
smb.HttpGetEnabled=true;
D. Insert the following code segment at line 19.
smb.HttpGetEnabled=true;
Answer: D

certification Microsoft   70-503-Csharp   certification 70-503-Csharp   70-503-Csharp   certification 70-503-Csharp
17. You are creating an endpoint for a Windows Communication Foundation service by using
Microsoft .NET Framework 3.5. You create the endpoint by using a custom binding.
You write the following code segment.
BasicHttpBinding binding=new BasicHttpBinding();
binding.Security.Message.ClientCredentialType=
?BasicHttpMessageCredentialType.Certificate;
binding.Security.Mode=BasicHttpSecurityMode.Message;
CustomBinding cb=new CustomBinding(binding);
BindingElementCollection bec=cb.CreateBindingElements();
You need to prevent the custom binding from making a persistent connection to the service endpoint.
Which code segment should you use?
A. cb.SendTimeout=TimeSpan.Zero;
B. binding.ReceiveTimeout=TimeSpan.Zero;
C. foreach (BindingElement bindingElement in bec)
{
HttpTransportBindingElement element=
(HttpTransportBindingElement) bindingElement;
element.KeepAliveEnabled=false;
}
D. foreach (BindingElement be in bec)
{
if (be is HttpTransportBindingElement)
{
HttpTransportBindingElement httpElement=
(HttpTransportBindingElement)be;
httpElement.KeepAliveEnabled=false;
}
}
Answer: D

certification Microsoft   70-503-Csharp   certification 70-503-Csharp   70-503-Csharp examen   70-503-Csharp   70-503-Csharp
18. You create a Windows Communication Foundation service by using Microsoft .NET Framework 3.5.
The service will receive notification messages from client applications by using a number of transports,
including HTTP, TCP, MSMQ, and others.
You need to ensure that all client applications can send notification messages to the service.
Which service contract should you use?
A. [ServiceContract]
public interface INotificationService {
[OperationContract(AsyncPattern=true)]
void LogMessage(string message);
}
B. [ServiceContract]
public interface INotificationService {
[OperationContract(ReplyAction="none")]
void LogMessage(string message);
}
C. [ServiceContract]
public interface INotificationService {
[OperationContract(IsOneWay=true)]
void LogMessage(string message);
}
D. [ServiceContract]
public interface INotificationService {
[OperationContract(IsTerminating=true)]
void LogMessage(string message);
}
Answer: C

certification Microsoft   70-503-Csharp   70-503-Csharp   70-503-Csharp examen   certification 70-503-Csharp
19. You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
The service will be hosted in a Console application.
You need to configure the service by using a configuration file other than the default app.config file.
Which code segment should you use?
A. class MyServiceHost : ServiceHost
{
public MyServiceHost(Type serviceType,
params Uri[] baseAddresses) : base(serviceType, baseAddresses)
{
}
protected override void InitializeRuntime()
{
//Load configuration here
}
}
B. class MyServiceHost : ServiceHost
{
public MyServiceHost(Type serviceType,
params Uri[] baseAddresses) : base(serviceType, baseAddresses)
{
}
protected override void ApplyConfiguration()
{
//Load configuration here
}
}
C. class MyServiceHost : ServiceHost
{
public MyServiceHost(Type serviceType,
params Uri[] baseAddresses) : base(serviceType, baseAddresses)
{
}
protected new void InitializeDescription(Type serviceType,
UriSchemeKeyedCollection baseAddresses)
{
//Load configuration here.
}
}
D. class MyServiceHost : ServiceHost
{
public MyServiceHost(Type serviceType,
params Uri[] baseAddresses) : base(serviceType, baseAddresses)
{
}
protected new void AddBaseAddress(Uri baseAddress)
{
//Load configuration here.
}
}
Answer: B

Microsoft examen   70-503-Csharp examen   70-503-Csharp   70-503-Csharp   70-503-Csharp   certification 70-503-Csharp

NO.7 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
You need to ensure that data sent in a SOAP header is in the following XML format.
<Data>
<string>String 1</string>
<string>String 2</string>
<string>String 3</string>
</Data>
Which code segment should you use?
A. [MessageContract]
public class MyMessage
{
[MessageHeader]
public string[] Data;
}
B. [MessageContract]
public class MyMessage
{
[MessageHeaderArray]
public string[] Data;
}
C. [MessageContract]
public class MyMessage
{
[MessageProperty]
public string[] Data;
}
D. [MessageContract]
public class MyMessage
{
[MessageBodyMember (Order=0)]
public string[] Data;
}
Answer: A

Microsoft   70-503-Csharp   certification 70-503-Csharp   70-503-Csharp examen   70-503-Csharp

NO.8 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
You need to ensure that the service can send data in the following format to the client applications.
<Account Id="">
<Name> </Name>
<Balance Currency=""> </Balance>
</Account>
Which code segment should you use?
A. [Serializable]
public class Account
{
[XmlAttribute]
public string Id;
[XmlElement]
public string Name;
[XmlAttribute]
public string Currency;
[XmlElement]
public double Balance;
}
B. [DataContract]
public class Account
{
[DataMember(Order=0)]
public string Id;
[DataMember(Order=1)]
public string Name;
[DataMember(Order=0)]
public double Balance;
[DataMember(Order=1)]
public string Currency;
}
C. [Serializable]
public class Account
{
[XmlAttribute]
public string Id;
public string Name;
[XmlElement("Balance")]
public BalanceVal Balance;
}
[Serializable]
public class BalanceVal
{
[XmlText]
public double Amount;
[XmlAttribute]
public string Currency;
}
D. [DataContract]
public class Account
{
[DataMember(Order=0)]
public string Id;
[DataMember(Order=1)]
public string Name;
[DataMember(Name="Balance", Order=2)]
public BalanceVal Balance;
}
[DataContract]
public struct BalanceVal
{
[DataMember(Order=0)]
public double Balance;
[DataMember(Order=1)]
public string Currency;
}
Answer: C

Microsoft examen   70-503-Csharp   70-503-Csharp

NO.9 You create a Windows Communication Foundation service by using Microsoft .NET Framework 3.5.
You create the following service contract.
[ServiceContract]
public interface IMath
{
[OperationContract]
int Add(int num1, int num2);
}
You need to add an operation contract to perform the Add operation asynchronously.
Which operation contract should you use?
A. [OperationContract(AsyncPattern=true)]
IAsyncResult BeginAdd(int num1, int num2);
int EndAdd(IAsyncResult res);
B. [OperationContract]
int BeginAdd(int num1, int num2, AsyncCallback cb, object state);
IAsyncResult EndAdd();
C. [OperationContract]
IAsyncResult BeginAdd(int num1, int num2);
[OperationContract]
int EndAdd(IAsyncResult res);
D. [OperationContract(AsyncPattern=true)]
IAsyncResult BeginAdd(int num1, int num2, AsyncCallback cb, object
state);
int EndAdd(IAsyncResult res);
Answer: D

Microsoft examen   certification 70-503-Csharp   70-503-Csharp

NO.10 You create a Windows Communication Foundation service by using Microsoft .NET Framework 3.5.
You write the following code segment.
[ServiceContract]
public interface IMathService
{
[OperationContract]
int AddNumbers(int a, int b);
double AddNumbers(double a, double b);
}
You have not deployed the IMathService service.
You need to expose the AddNumbers (double a, double b) operation to the IMathService service contract.
Which code segment should you use?
A. [OperationContract]
int AddNumbers(int a, int b);
[OperationContract]
double AddNumbers(double a, double b);
B. [OperationContract(Name="AddInt")]
int AddNumbers(int a, int b);
[OperationContract(Name="AddDouble")]
double AddNumbers(double a, double b);
C. [OperationContract(Action="IMathService/AddInt")]
int AddNumbers(int a, int b);
[OperationContract(Action="IMathService/AddDouble")]
double AddNumbers(double a, double b);
D. [OperationContract(Action="AddInt/*")]
int AddNumbers(int a, int b);
[OperationContract(Action="AddDouble/*")]
double AddNumbers(double a, double b);
Answer: B

Microsoft   70-503-Csharp examen   certification 70-503-Csharp   70-503-Csharp   70-503-Csharp examen

NO.11 You create a Windows Communication Foundation service by using Microsoft .NET Framework 3.5.
The service contains the following code segment.
[DataContract]
public class Person
{
}
[DataContract]
public class Customer : Person
{
}
You need to create a service contract that meets the following requirements:
` The service contract must have an operation contract named GetPerson that returns an object of type
Person.
` The GetPerson operation must be able to return an object of type Customer.
Which code segment should you use?
A. [ServiceContract]
[ServiceKnownType("GetPerson")]
public interface IMyService
{
[OperationContract]
Person GetPerson();
}
B. [ServiceContract]
public interface IMyService
{
[OperationContract]
[ServiceKnownType("Customer")]
Person GetPerson();
}
C. [ServiceContract]
[ServiceKnownType(typeof(Customer))]
public interface IMyService
{
[OperationContract]
Person GetPerson();
}
D. [ServiceContract]
[ServiceKnownType("GetPerson",typeof(Customer))]
public interface IMyService
{
[OperationContract]
Person GetPerson();
}
Answer: C

certification Microsoft   70-503-Csharp   70-503-Csharp examen   70-503-Csharp   70-503-Csharp examen

NO.12 You create a Windows Communication Foundation (WCF) service by using Microsoft .NET Framework
3.5.
The WCF service contains two operations named ProcessSimpleOrder and ProcessComplexOrder.
You need to expose the ProcessSimpleOrder operation to all the client applications. You also need to
expose the ProcessComplexOrder operation only to specific client applications.
Which code segment should you use?
A. [ServiceContract]
public interface IOrderManager
{
[OperationContract(Action="*")]
void ProcessSimpleOrder();
[OperationContract]
void ProcessComplexOrder();
}
B. [ServiceContract]
public interface IOrderManager
{
[OperationContract(Name="http: //contoso.com/Simple")]
void ProcessSimpleOrder();
[OperationContract(Name="http: //contoso.com/Complex")]
void ProcessComplexOrder();
}
C. [ServiceContract]
public interface ISimpleOrderManager
{
[OperationContract]
void ProcessSimpleOrder();
}
[ServiceContract]
public interface IComplexOrderManager: ISimpleOrderManager
{
[OperationContract]
void ProcessComplexOrder();
}
D. [ServiceContract]
public interface ISimpleOrderManager
{
[OperationContract(Name="http: //contoso.com/Simple")]
void ProcessSimpleOrder();
}
public interface IComplexOrderManager: ISimpleOrderManager
{
[OperationContract(Name="http: //contoso.com/Complex")]
void ProcessComplexOrder();
}
Answer: C

Microsoft   certification 70-503-Csharp   70-503-Csharp   70-503-Csharp   70-503-Csharp   70-503-Csharp

NO.13 }

NO.14 5. You have successfully created two interfaces: IMyService and IMyServiceClient.
You need to ensure that the service is able to call methods from the client application by using the
IMyServiceClient interface.
Which code segment should you use?
A. [ServiceContract(CallbackContract=typeof(IMyServiceClient))]
public interface IMyService
{
...
}
public interface IMyServiceClient
{
...
}
B. [ServiceContract(CallbackContract=typeof(IMyService))]
public interface IMyService
{
...
}
public interface IMyServiceClient
{
...
}
C. [ServiceContract(SessionMode=SessionMode.Allowed)]
[ServiceKnownType(typeof(IMyServiceClient))]
public interface IMyService : IMyServiceClient
{
...
}
public interface IMyServiceClient
{
...
}
D. [ServiceContract]
[ServiceKnownType(typeof(IMyServiceClient))]
public interface IMyService
{
...
}
[ServiceContract]
public interface IMyServiceClient : ICommunicationObject
{
...
}
Answer: A

Microsoft   certification 70-503-Csharp   70-503-Csharp   70-503-Csharp
3. You have created a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
The existing service interface is named IMyService, and contains the following code segment.
[ServiceContract(Name="SvcOrder", Namespace="http://contoso.com/services")]
public interface IMyService
{
[OperationContract]
void DoSomething();
}
You create a new service named IMyServiceV1 that contains an operation named DoSomethingElse.
You need to ensure that existing client applications are still able to access the IMyService.DoSomething
method without modifying client code.
Which code segment should you use?
A. [ServiceContract(Namespace="http:?//contoso.com/services/V1")]
public interface IMyServiceV1 : IMyService
{
[OperationContract]
void DoSomethingElse();
}
B. [ServiceContract(Name="SvcOrder")]
public interface IMyServiceV1 : IMyService
{
[OperationContract]
void DoSomethingElse();
}
C. [ServiceContract(Name="SvcOrderV1",
Namespace="http: //contoso.com/services")]
public interface IMyServiceV1 : IMyService
{
[OperationContract]
void DoSomethingElse();
}
D. [ServiceContract(Name="SvcOrder",
Namespace="http: //contoso.com/services")]
public interface IMyServiceV1 : IMyService
{
[OperationContract]
void DoSomethingElse();
}
Answer: D

Microsoft   70-503-Csharp   70-503-Csharp examen   70-503-Csharp   70-503-Csharp

NO.15 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
You write the following code segment. (Line numbers are included for reference only.)
01 Uri baseAddress=
02 new Uri ( http://localhost:8000/ExamService );
03 Uri mexAddress=new Uri("");
04 ServiceHost serviceHost=new ServiceHost(typeof(
05 ?ExamService), baseAddress);
06 ServiceMetadataBehavior smb=
07 serviceHost.Description.Behaviors.
08 Find<ServiceMetadataBehavior>();
09 if (smb != null)
10 {
11
12 }
13 else
14 {
15 smb=new ServiceMetadataBehavior();
16 serviceHost.Description.Behaviors.Add(smb);

NO.16 You are creating a Windows Communication Foundation (WCF) service by using Microsoft .NET
Framework 3.5.
You configure a binding to enable streaming.
You need to ensure that the client application is able to stream large XML files to the WCF service.
Which operation contract should you create?
A. [OperationContract]
void UploadFile(Stream xmlData);
B. [OperationContract]
void UploadFile(XmlWriter xmlData);
C. [OperationContract]
void UploadFile(StreamWriter xmlData);
D. [OperationContract]
void UploadFile(byte[] xmlData);
Answer: A

certification Microsoft   certification 70-503-Csharp   certification 70-503-Csharp   70-503-Csharp examen   70-503-Csharp examen   certification 70-503-Csharp

NO.17 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5. The service will be hosted in a managed Console application.
You want to add endpoints to the service.
You need to ensure that all endpoints use the same base address.
Which code fragment should you use?
A. [ServiceContract]
public interface IMortgageService { ­
public class MortgageService : IMortgageService { ­
Uri baseAddress=new Uri("http: //localhost:8888/MortgageService");
ServiceHost serviceHost=
new ServiceHost(typeof(MortgageService), new Uri[] {baseAddress });
serviceHost.AddServiceEndpoint(typeof(IMortgageService),
new BasicHttpBinding(), "");
serviceHost.Open();
B. [ServiceContract]
public interface IMortgageService { ­
public class MortgageService : IMortgageService { ­
Uri baseAddress=new Uri("http: //localhost:8888/MortgageService");
ServiceHost serviceHost=
new ServiceHost(typeof(MortgageService), new Uri[] {});
serviceHost.AddServiceEndpoint(typeof(IMortgageService),
new BasicHttpBinding(), baseAddress);
serviceHost.Open();
C. [ServiceContract]
public interface IMortgageService { ­
public class MortgageService : IMortgageService { ­
string baseAddress="http: //localhost:8888/MortgageService";
ServiceHost serviceHost=
new ServiceHost(typeof(MortgageService), new Uri[] { });
serviceHost.AddServiceEndpoint(typeof(IMortgageService),
new BasicHttpBinding(), baseAddress);
serviceHost.Open();
D. [ServiceContract(Namespace="http: //localhost:8888/MortgageService")]
public interface IMortgageService { ­
public class MortgageService : IMortgageService { ­
ServiceHost serviceHost=
new ServiceHost(typeof(MortgageService), new Uri[] { });
serviceHost.AddServiceEndpoint(typeof(IMortgageService),
new BasicHttpBinding(), "");
serviceHost.Open();
Answer: A

Microsoft   70-503-Csharp   70-503-Csharp   70-503-Csharp   70-503-Csharp

NO.18 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
You need to programmatically add the following endpoint definition to the service.
http://localhost:8000/ExamService/service
Which code segment should you use?
A. String baseAddress="http: //localhost:8000/ExamService";
BasicHttpBinding binding1=new BasicHttpBinding();
using(ServiceHost host=new ServiceHost(typeof(ExamService)))
{
host.AddServiceEndpoint(typeof(IExam),binding1,baseAddress);
}
B. String baseAddress="http: //localhost:8000/ExamService/service";
BasicHttpBinding binding1=new BasicHttpBinding();
using(ServiceHost host=new ServiceHost(typeof(ExamService)))
{
host.AddServiceEndpoint(typeof(IExam),binding1,baseAddress);
}
C. String baseAddress="http: //localhost:8000/ExamService";
WsHttpBinding binding1=new WsHttpBinding();
using(ServiceHost host=new ServiceHost(typeof(ExamService)))
{
host.AddServiceEndpoint(typeof(IExam),binding1,baseAddress);
}
D. String baseAddress="net.tcp: //localhost:8000/ExamService/service";
NetTcpBinding binding1=new NetTcpBinding();
using(ServiceHost host=new ServiceHost(typeof(ExamService)))
{
host.AddServiceEndpoint(typeof(IExam),binding1,baseAddress);
}
Answer: B

certification Microsoft   70-503-Csharp examen   70-503-Csharp   certification 70-503-Csharp

NO.19 You create a Windows Communication Foundation (WCF) service by using Microsoft .NET Framework
3.5.
You write the following code segment. (Line numbers are included for reference only.)
01 public interface IMyService
02 {
03
04 string ProcessString(string name);
05 }
You create a host for the WCF service. You also create a service endpoint at http://localhost:8080/service.
You add an instance of the HttpTransferEndPointBehavior class to the host.
You need to ensure that the ProcessString method can be invoked from a Web browser by using the URL
http://localhost:8080/service/process name=value
Which code segment should you insert at line 03?
A. [OperationContract(Name="process", Action="Get")]
B. [OperationContract(Name="process", Action="Post")]
C. [OperationContract]
[WebGet(UriTemplate = "process name={name}")]
D. [OperationContract]
[WebInvoke(UriTemplate = "process name={name}")]
Answer: C

Microsoft   70-503-Csharp examen   70-503-Csharp

NO.20 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
You create the following service contract. (Line numbers are included for reference only.)
01 [ServiceContract]
02 public interface IMyService
03 {
04 [OperationContract]
05
06 List<string> GetData(int index);
07 }
You need to ensure that the GetData operation can be accessed by using the URI in the following
manner:
` GetData/1 for the index value 1
` GetData/2 for the index value 2
` .
` .
` GetData/n for the index value n
Which code segment should you insert at line 05?
A. [WebGet(UriTemplate="GetData/{index}",
?BodyStyle=WebMessageBodyStyle.Bare)]
B. [WebGet(UriTemplate="GetData index={index}",
?BodyStyle=WebMessageBodyStyle.Bare)]
C. [WebGet(UriTemplate="GetData/[index]",
?BodyStyle=WebMessageBodyStyle.Bare)]
D. [WebGet[UriTemplate="GetData index={index}",
?BodyStyle=WebMessageBodyStyle.Bare]]
Answer: A

Microsoft   70-503-Csharp   70-503-Csharp examen   70-503-Csharp   certification 70-503-Csharp

Un bon choix de l'outil à se former est le point essentiel à passer le test Microsoft 70-503-Csharp, et les documentations à propos de rechercher le test Microsoft 70-503-Csharp est toujours une part plus importante pendant la préparation de test Certification. Les Q&As offertes par les experts de Pass4Test sont presque même que les tests réels. Pass4Test est un site web particulièrement en apportant les facilités aux gens qui veulent passer le test Certification.

Dernières Microsoft 070-545-Csharp examen pratique questions et réponses

Si vous traviallez dur encore pour préparer le test de Microsoft 070-545-Csharp et réaliser votre but plus vite, Pass4Test peut vous donner une solution plus pratique. Choisir la Q&As de Pass4Test qui vous assure que c'est pas un rêve à réussir le test Microsoft 070-545-Csharp.

Il faut une bonne préparation et aussi une série de connaissances professionnelles complètes pour réussir le test Microsoft 070-545-Csharp. La ressourece providée par Pass4Test peut juste s'accorder votre demande.

Si vous voulez se prouver une compétition et s'enraciner le statut dans l'industrie IT à travers de test Certification Microsoft 070-545-Csharp, c'est obligatoire que vous devez avior les connaissances professionnelles. Mais il demande pas mal de travaux à passer le test Certification Microsoft 070-545-Csharp. Peut-être d'obtenir le Certificat Microsoft 070-545-Csharp peut promouvoir le tremplin vers l'Industrie IT, mais vous n'avez pas besoin de travailler autant dur à préparer le test. Vous avez un autre choix à faire toutes les choses plus facile : prendre le produit de Pass4Test comme vos matériaux avec qui vous vous pratiquez avant le test réel. La Q&A de Pass4Test est recherchée particulièrement pour le test IT.

Pass4Test a une grande équipe composée des experts d'expérience dans l'industrie IT. Leurs connaissances professionnelles et les recherches font une bonne Q&A, qui vous permet à passer le test Microsoft 070-545-Csharp. Dans Pass4Test, vous pouvez trouver une façon plus convenable à se former. Les resources de Pass4Test sont bien fiable. Choisissez Pass4Test, choisissez un raccourci à réussir le test Microsoft 070-545-Csharp.

Si vous faites toujours la lutte contre le test Microsoft 070-545-Csharp, Pass4Test peut vous aider à résoudre ces difficultés avec ses Q&As de qualité, et atteindre le but que vous avez envie de devenir un membre de Microsoft 070-545-Csharp. Si vous avez déjà décidé à s'améliorer via Microsoft 070-545-Csharp, vous n'avez pas aucune raison à refuser Pass4Test. Pass4Test peut vous aider à passer le test à la première fois.

Code d'Examen: 070-545-Csharp
Nom d'Examen: Microsoft (TS:Microsoft Visio 2007, Application Development)
Questions et réponses: 54 Q&As

Pass4Test vous permet à réussir le test Certification sans beaucoup d'argents et de temps dépensés. La Q&A Microsoft 070-545-Csharp est recherchée par Pass4Test selon les résumés de test réel auparavant, laquelle est bien liée avec le test réel.

Dans cette société de l'information technologies, c'est bien populaire que l'on prenne la formation en Internet, Pass4Test est l'un des sites d'offrir la formation particulère pour le test Microsoft 070-545-Csharp. Pass4Test a une expérience riche pour répondre les demandes des candidats.

070-545-Csharp Démo gratuit à télécharger: http://www.pass4test.fr/070-545-Csharp.html

NO.1 You have a shape that contains a Shape Data row named Grade, where Type=0. You need to modify
the Grade row so that it is visible and read-only within the Shape Data window and the Shape Data dialog
box. What should you do?
A. In the Prop.Grade row, change the value of the Type cell to 9.
B. In the Prop.Grade row, change the value of the Type cell to 1, and the formula in the Format cell to
=Prop.Grade.
C. In the Prop.Grade row, change the formula in the Format cell to =LOCK.
D. Insert a new user-defined cell with the formula =
DEPENDSON(Prop.Grade)+SETF(GetRef(Prop.Grade),Prop.Grade).
Answer: B

Microsoft   070-545-Csharp   070-545-Csharp examen   070-545-Csharp

NO.2 You need to create two PivotDiagrams in Office Visio 2007 by using the minimum number of Visio
documents and pages. What should you do?
A. Create two new Visio documents by using the PivotDiagram template.
B. Create a new Visio document by using the PivotDiagram template. Insert a PivotDiagram into the
existing page.
C. Create a new Visio document by using the PivotDiagram template. Insert a new page, and then insert
the PivotDiagram into the new page.
D. Create two new Visio documents by using the PivotDiagram template. Copy the PivotDiagram from
one document to a blank page in the other document.
Answer: B

certification Microsoft   070-545-Csharp   070-545-Csharp examen   070-545-Csharp examen

NO.3 You need to create an organization chart of employees by using a comma-separated values (CSV) file
and the Organization Chart Wizard. Which two columns must the CSV file contain? (Each correct
answer presents part of the solution. Choose two.)
A. A column that uniquely identifies each employee
B. A column that identifies each employees job title
C. A column that contains each employees department
D. A column that identifies who each employee reports to
Answer: AD

certification Microsoft   certification 070-545-Csharp   certification 070-545-Csharp   070-545-Csharp   070-545-Csharp examen   070-545-Csharp

NO.4 You have an ODBC database that contains information that you want to display in Office Visio 2007.
You need to update the database records by modifying shape data from Visio 2007. What are three
possible ways to achieve this goal? (Each correct answer presents a complete solution. Choose three.)
A. In Visio, use the Link Data to Shapes command from the Data menu.
B. In Visio, point to Visio Extras, start the Database Wizard, and then click Link shapes to database
records.
C. In Visio, click Import Data on the Plan menu.
D. In Visio, point to Visio Extras and click Link to ODBC Database.
E. Create custom code functions to read data from the data source, update the Shape Data rows, and
then write the data to the data source.
Answer: BDE

Microsoft   070-545-Csharp   070-545-Csharp   certification 070-545-Csharp   070-545-Csharp

NO.5 You need to link a master shape to an ODBC database. The master shape must display the Update
Database Record command when you right-click the shape. What should you do?
A. In Office Visio 2007, run the Database Wizard.
B. From Control Panel, add a new ODBC data source.
C. In Office Visio 2007, run the Database Export Wizard.
D. In Office Visio 2007, run the Export to Database command.
Answer: A

Microsoft examen   certification 070-545-Csharp   certification 070-545-Csharp

NO.6 An External Data recordset named Computer Inventory contains a column named MachineSN. You
create a new Office Visio 2007 diagram and load the Computers and Monitors stencil. A shape named PC
Master from the Computers and Monitors stencil has a Shape Data row labeled Serial Number. To add
a shape to the Visio 2007 diagram, you select the PC Master shape, and then drag and drop a row from
the External Data window to the Visio 2007 page. You notice that the new shapes Serial Number row is
empty. You need the values from the MachineSN column to be entered automatically into the row
labeled Serial Number when you add the shape. What should you do?
A. Change the name of the External Data recordsets column from MachineSN to Serial Number.
B. Change the name of the External Data recordset from Computer Inventory to Serial Number.
C. Modify the PC Master shape on the document stencil. Change the row name of the shape data row
from Serial Number to MachineSN.
D. Copy the PC Master shape to the document stencil. Change the label of the shape data row from
Serial Number to _visDM_MachineSN.
Answer: A

Microsoft examen   070-545-Csharp   certification 070-545-Csharp

NO.7 You receive an XML data file and a separate XML schema file. The XML schema file describes the XML
data. You need to load the XML data file into the External Data window. Which two actions should
you perform? (Each correct answer presents part of the solution. Choose two.)
A. Transform the XML data file into the classic ActiveX Data Objects (ADO) RowsetSchema format.
B. Verify that the XML data file is well-formed and uses the namespace
http://schemas.microsoft.com/visio/2006/extension.
C. In a code module, use the DataRecordsets object Add method in the Office Visio 2007 document.
D. In a code module, use the DataRecordsets object AddFromXML method in the Office Visio 2007
document.
Answer: AD

certification Microsoft   070-545-Csharp examen   070-545-Csharp examen   070-545-Csharp   070-545-Csharp examen

NO.8 You plan to create a timeline diagram by using Microsoft Office Project 2007. You need to ensure
that the Project data can be imported into Office Visio 2007 by using the Import Timeline Wizard. What
should you do?
A. In Project, save the data as a Microsoft Project File (*.mpp).
B. In Project, save the data as a Microsoft Project Database (*.mpd).
C. In Project, save the data as a Microsoft Project Workspace (*.mpw).
D. In Project, save the data as a Microsoft Project Exchange (*.mpx).
Answer: A

Microsoft   certification 070-545-Csharp   070-545-Csharp   070-545-Csharp

NO.9 You have a drawing that contains custom shape data. You need to export the shape data to a new
Microsoft Office Excel 2007 workbook. What should you do?
A. Use the Database Wizard.
B. Use the Reports command.
C. Use the Export to Database command.
D. Save the file as an XML drawing.
Answer: B

certification Microsoft   070-545-Csharp examen   070-545-Csharp   070-545-Csharp examen   070-545-Csharp   070-545-Csharp

NO.10 You create a shape that has two Shape Data rows named Department and CostCode. Both the
Department and the CostCode rows have the Type =1.
The Department row Format cell has the formula =A;B.
You need to modify the ShapeSheet to meet the following requirements:
When a user selects Department A, only CostCodes A1 and A2 are visible.
When a user selects Department B, only CostCodes B1 and B2 are visible.
What should you do?
A. Insert a new user-defined cell and enter the formula =SETF(GetRef(Prop.CostCode.Format), =
INDEX(LOOKUP(Prop.Department,Prop.Department.Format),"A1;A2|B1;B2","|"))
B. Enter the following formula in the Format cell of the CostCode Shape Data row.
=INDEX(LOOKUP(Prop.Department,Prop.Department.Format),"A1;A2|B1;B2")
C. Enter the following formula in the Format cell of the CostCode Shape Data row.
=""""&INDEX(LOOKUP(Prop.Department,Prop.Department.Format),"A1;A2|B1;B2","|")&""""
D. Enter the following formula in the Format cell of the CostCode Shape Data row.
=INDEX(LOOKUP(Prop.Department,Prop.Department.Format),"A1;A2|B1;B2","|")
Answer: D

certification Microsoft   certification 070-545-Csharp   certification 070-545-Csharp   certification 070-545-Csharp

Pass4Test est aussi un site d'offrir la ressource des connaissances pour le test Certification IT. Selon les Feedbacks venus de gens qui ont untilié les produits de Pass4Test, Pass4Test est un site fiable comme l'outil de se former. Les Q&As offertes par Pass4Test sont bien précises. Les experts de Pass4Test mettent à jour nos documentations de formation de temps de temps.

070-521-Csharp dernières questions d'examen certification Microsoft et réponses publiés

Pour réussir le test Microsoft 070-521-Csharp demande beaucoup de connaissances professionnelles IT. Il n'y a que les gens qui possèdent bien les connaissances complètes à participer le test Microsoft 070-521-Csharp. Maintenant, on a les autres façons pour se former. Bien que vous n'ayez pas une connaissance complète maintenant, vous pouvez quand même réussir le test Microsoft 070-521-Csharp avec l'aide de Pass4Test. En comparaison des autres façons, cette là dépense moins de temps et de l'effort. Tous les chemins mènent à Rome.

Vous aurez le service de la mise à jour gratuite pendant un an une fois que vous achetez le produit de Pass4Test. Vous pouvez recevoir les notes immédiatement à propos de aucun changement dans le test ou la nouvelle Q&A sortie. Pass4Test permet tous les clients à réussir le test Microsoft 070-521-Csharp à la première fois.

Pass4Test est un site de provider les chances à se former avant le test Certification IT. Il y a de différentes formations ciblées aux tous candidats. C'est plus facile à passer le test avec la formation de Pass4Test. Parmi les qui ont déjà réussi le test, la majorité a fait la préparation avec la Q&A de Pass4Test. Donc c'est pourquoi, Pass4Test a une bonne réputation dansn l'Industrie IT.

Aujoud'hui, c'est une société de l'informatique. Beaucoup d'organisations peut provider l'outil de se former pour le test Certification Microsoft 070-521-Csharp. Mais on doit admettre que ces site n'ont pas la capacité à offrir une bonne Q&A, elles sont généralement très vagues et sans les points. C'est loin d'attirer les attentions des candidats.

Code d'Examen: 070-521-Csharp
Nom d'Examen: Microsoft (UPG:Trans MCPD.NET Frmwk 3.5 Dev Skil to .NET 4 Wndws App De)
Questions et réponses: 108 Q&As

070-521-Csharp Démo gratuit à télécharger: http://www.pass4test.fr/070-521-Csharp.html

NO.1 You are consuming a Windows Communication Foundation (WCF) service in an ASP.NET Web
application. The service interface is defined as follows.
[ServiceContract]
public interface ICatalog
{
[OperationContract]
[WebGet(UriTemplate = "/Catalog/Items/{id}",
ResponseFormat = WebMessageFormat.Json)]
string RetrieveItemDescription(int id);
}
The service is hosted at /Catalog.svc.
You need to call the service using jQuery to retrieve the description of an item as indicated by a variable
named itemId.
Which code segment should you use?
A. $.get(String.format("/Catalog.svc/Catalog/Items/?id={0}", itemId)
null,
function (data) {
},
"javascript");
B. $.get(String.format("/Catalog.svc/Catalog/Items/{0}", itemId),
null,
function (data) {
},
"json");
C. $.get(String.format("/Catalog.svc/Catalog/Items/{0}", itemId),
null,
function (data) {
},
"xml");
D. $.get(String.format("/Catalog.svc/Catalog/Items/id={0}", itemId),
null,
function (data) {
},
"json");
Answer: B

Microsoft examen   070-521-Csharp   certification 070-521-Csharp

NO.2 A WCF service code is implemented as follows. (Line numbers are included for reference only.)
01 [ServiceContract]
02 [ServiceBehavior(InstanceContextMode =
03 InstanceContextMode.Single)]
04 public class CalculatorService
05 {
06 [OperationContract]
07 public double Calculate(double op1, string op, double op2)
08 {
24 }
25 }
You need to decrease the response time of the service.
What are two possible ways to achieve this goal? (Each correct answer presents a complete solution.
Choose two.)
A. Change the service behavior to the following.
[ServiceBehavior(
InstanceContextMode = InstanceContextMode.Single,
ConcurrencyMode = ConcurrencyMode.Multiple)]
B. Change the service behavior to the following.
[ServiceBehavior(InstanceContextMode = InstanceContextMode.PerCall)]
C. Require the clients use threads, the Parallel Task Library, or other mechanism to issue service calls in
parallel.
D. Require the clients to use async operations when calling the service.
Answer: AB

Microsoft   070-521-Csharp   070-521-Csharp examen   certification 070-521-Csharp

NO.3 You are creating a Windows Communication Foundation (WCF) service based on WSHttpBinding.
New audit requirements dictate that callers must be authenticated on every call to ensure that their
credentials have not been revoked.
You need to ensure that the service will not cache the security request token.
What should you do?
A. Apply a ServiceBehavior attribute to the service implementation class with the InstanceContextMode
property set to Single.
B. In the message security configuration, change clientCredentialType from IssuedToken to UserName.
C. In the message security configuration, set establishSecurityContext to false.
D. At the end of every operation, call the SessionStateUtility.RaiseSessionEnd method.
Answer: C

Microsoft   070-521-Csharp   070-521-Csharp   070-521-Csharp examen   070-521-Csharp

NO.4 You are moving a Windows Communication Foundation (WCF) service into production.
You need to be able to monitor the health of the service. You only want to enable all performance counter
instances exposed by the ServiceModelService 4.0.0.0 counter group.
Which element should you add to the system.serviceModel section in the application configuration file?
A. <diagnostics performanceCounters="ServiceOnly" />
B. <diagnostics wmiProviderEnabled="true" performanceCounters="Off" />
C. <diagnostics performanceCounters="All" />
D. <diagnostics wmiProviderEnabled="true" />
Answer: A

Microsoft   070-521-Csharp examen   070-521-Csharp   070-521-Csharp

NO.5 </serviceBehaviors>

NO.6 You are creating a Windows Communication Foundation (WCF) service. You do not want to expose the
internal implementation at the service layer.
You need to expose the following class as a service named Arithmetic with an operation named Sum.
public class Calculator
{
public int Add(int x, int y)
{
}
}
Which code segment should you use?
A. [ServiceContract(Namespace="Arithmetic")]
public class Calculator
{
[OperationContract(Action="Sum")]
public int Add(int x, int y)
{
}
}
B. [ServiceContract(ConfigurationName="Arithmetic")]
public class Calculator
{
[OperationContract(Action="Sum")]
public int Add(int x, int y)
{
}
}
C. [ServiceContract(Name="Arithmetic")]
public class Calculator
{
[OperationContract(Name="Sum")]
public int Add(int x, int y)
{
}
}
D. [ServiceContract(Name="Arithmetic")]
public class Calculator
{
[OperationContract(ReplyAction="Sum")]
public int Add(int x, int y)
{
}
}
Answer: C

Microsoft   070-521-Csharp   070-521-Csharp   certification 070-521-Csharp

NO.7 You are developing a Windows Communication Foundation (WCF) service that reads messages from
a public non-transactional MSMQ queue.
You need to configure the service to read messages from the failed-delivery queue.
Which URI should you specify in the endpoint configuration settings of the service?
A. net.msmq://localhost/msmq$;FailedMessages
B. net.msmq://localhost/msmq$;DeadLetter
C. net.msmq://localhost/system$;DeadXact
D. net.msmq://localhost/system$;DeadLetter
Answer: D

certification Microsoft   070-521-Csharp   070-521-Csharp examen

NO.8 </behaviors>
...
You need to configure the service to publish the service metadata.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Add the following XML segment between lines 10 and 11.
<endpoint?address=""
binding="mexHttpBinding"
contract="IMetadataExchange"
/>
B. Add the following XML segment between lines 10 and 11.
<endpoint?address=""
binding="basicHttpBinding"
contract="IMetadataExchange"
/>
C. Add the following XML segment between lines15 and 16.
<serviceDiscovery>
<announcementEndpoints>
<endpoint address=""/>
</announcementEndpoints>
</serviceDiscovery>
D. Add the following XML segment between lines 15 and 16
<serviceMetadata httpGetEnabled="true"/>
Answer: AD

certification Microsoft   070-521-Csharp examen   certification 070-521-Csharp   070-521-Csharp
17. Four Windows Communication Foundation (WCF) services are hosted in Microsoft Internet
Information Services (IIS). No behavior configuration exists in the web.config file.
You need to configure the application so that every service and endpoint limits the number of concurrent
calls to 50 and the number of concurrent sessions to 25.
Which XML segment should you add to the system.serviceModel configuration section of the web.config
file?
A. <behaviors>
<serviceBehaviors>
<behavior name="*">
<serviceThrottling maxConcurrentCalls="50" maxConcurrentSessions="25"/>
</behavior>
</serviceBehaviors>
</behaviors>
B. <behaviors>
<serviceBehaviors>
<behavior name="default">
<serviceThrottling maxConcurrentCalls="50" maxConcurrentSessions="25"/>
</behavior>
</serviceBehaviors>
</behaviors>
C. <behaviors>
<serviceBehaviors>
<behavior name="">
<serviceThrottling maxConcurrentCalls="50" maxConcurrentSessions="25"/>
</behavior>
</serviceBehaviors>
</behaviors>
D. <behaviors>
<serviceBehaviors>
<behavior name="ALL">
<serviceThrottling maxConcurrentCalls="50" maxConcurrentSessions="25"/>
</behavior>
</serviceBehaviors>
</behaviors>
Answer: C

Microsoft examen   070-521-Csharp   070-521-Csharp examen   070-521-Csharp   070-521-Csharp examen
18. The endpoint of a Windows Communication Foundation (WCF) service uses basicHttpBinding for its
binding. Your company's policies have changed to require that messages not be sent in clear text.
You must ensure that all messages are encrypted when traveling across the network.
What should you do?
A. Set the ProtectionLevel property on the service contract and update the binding attribute in the
endpoint element of the configuration file to wsHttpBinding.
B. Set the ProtectionLevel property on the service contract and update the bindingConfiguration attribute
in the endpoint element of the configuration file to webHttpBinding.
C. Set the PrincipalPermissionAttribute on the service contract and update the binding attribute in the
endpoint element of the configuration file to wsHttpBinding.
D. Set the PrincipalPermissionAttribute on the service contract and update the bindingConfiguration
attribute in the endpoint element of the configuration file to wsHttpBinding.
Answer: A

Microsoft examen   070-521-Csharp   070-521-Csharp examen

NO.9 You are adding a Windows Communication Foundation (WCF) service to an existing application. The
application is configured as follows. (Line numbers are included for reference only.)
01?<configuration>
02 <system.serviceModel>
03 <services>
04 <service name="Contoso.Sales.StockService"
05 behaviorConfiguration="MetadataBehavior">
06 <host>
07 <baseAddresses>
08 <add
baseAddress="http://contoso.com:8080/StockService" />
09 </baseAddresses>
10 </host>
11 </service>
12 </services>
13 <behaviors>
14 <serviceBehaviors>
15 <behavior name="MetadataBehavior">
16 </behavior>

NO.10 A Windows Communication Foundation (WCF) service has the following contract.
[ServiceContract(Namespace="http://contoso.com")]
public interface IShipping
{
[OperationContract]
string DoWork(int id);
}
This is one of several service contracts hosted by your application. All endpoints use SOAP 1.2 bindings
with WS-Addressing 1.0. The System.ServiceModel.MessageLogging trace source in the
system.diagnostics configuration section is configured with one listener.
You need to make sure that only the messages that are returned from the DoWork operation are logged.
Which XML segment should you add to the system.serviceModel/diagnostics/messageLogging/filters
configuration element?
A. <add xmlns:addr="http://www.w3.org/2005/08/addressing">
//addr:Action[text() =
'http://contoso.com/IShipping/DoWorkResponse']
</add>
B. <add xmlns:soap="http://www.w3.org/2003/05/soap-envelope">
//soap:Action[text() =
'http://contoso.com/IShipping/DoWorkResponse']
</add>
C. <add xmlns:addr="http://www.w3.org/2005/08/addressing">
//addr:Action[text() =
'http://contoso.com/IShipping/DoWork']
</add>
D. <add xmlns:soap="http://www.w3.org/2003/05/soap-envelope">
//soap:Action[text() =
'http://contoso.com/IShipping/DoWork']
</add>
Answer: A

Microsoft examen   certification 070-521-Csharp   070-521-Csharp examen   070-521-Csharp

NO.11 You are creating a Windows Communication Foundation (WCF) service that is implemented as follows.
(Line numbers are included for reference only.)
01 [ServiceContract]
02 [ServiceBehavior(IncludeExceptionDetailsInFaults = true)]
03 public class OrderService
04 {
05 [OperationContract]
06 public void SubmitOrder(Order anOrder)
07 {
08 try
09 {
10
11 }
12 catch(DivideByZeroException ex)
13 {
14
15 }
16 }
17 }
You need to ensure that the stack trace details of the exception are not included in the error information
sent to the client.
What should you do?
A. Replace line 14 with the following line.
throw;
B. Replace line 14 with the following line.
throw new FaultException<Order>(anOrder, ex.ToString());
C. After line 05, add the following line.
[FaultContract(typeof(FaultException<Order>))]
Replace line 14 with the following line.
throw ex;
D. After line 05, add the following line.
[FaultContract(typeof(FaultException<Order>))]
Replace line 14 with the following line.
throw new FaultException<Order>(anOrder, "Divide by zero exception");
Answer: D

Microsoft   070-521-Csharp examen   070-521-Csharp   070-521-Csharp   certification 070-521-Csharp

NO.12 A Windows Communication Foundation (WCF) service has a callback contract. You are developing a
client application that will call this service.
You must ensure that the client application can interact with the WCF service.
What should you do?
A. On the OperationContractAttribute, set the AsyncPattern property value to true.
B. On the OperationContractAttribute, set the ReplyAction property value to the endpoint address of the
client.
C. On the client, create a proxy derived from DuplexClientBase<TChannel>.
D. On the client, use GetCallbackChannel<T>.
Answer: C

Microsoft   certification 070-521-Csharp   certification 070-521-Csharp   certification 070-521-Csharp

NO.13 A Windows Communication Foundation (WCF) service is responsible for transmitting XML documents
between systems. The service has the following requirements:
It must minimize the transmission size by attaching the XML document as is without using escape
characters or base64 encoding.
It must interoperate with systems that use SOAP but are not built on the .NET platform.
You need to configure the service to support these requirements.
Which message encoding should you use?
A. Binary message encoding
B. MTOM (Message Transmission Optimization Mechanism) message encoding
C. Text message encoding with message version set to none
D. Text message encoding with message version set to SOAP 1.2
Answer: B

Microsoft   certification 070-521-Csharp   070-521-Csharp examen   certification 070-521-Csharp   070-521-Csharp

NO.14 Your Windows Communication Foundation (WCF) client application uses HTTP to communicate with
the service.
You need to enable message logging and include all security information such as tokens and nonces in
logged messages.
What should you do?
A. In the application configuration file, add the logKnownPii attribute to the message logging diagnostics
source and set the value of the attribute to true.
Generate the ContosoService class using the Add Service Reference wizard.
Add a reference to System.ServiceModel.Routing.dll.
Add the following code segment.
ContosoService client = new ContosoService();
SoapProcessingBehavior behavior = new SoapProcessingBehavior();
behavior.ProcessMessages = true;
client.Endpoint.Behaviors.Add(behavior);
B. In the application configuration file, add the following XML segment to the system.serviceModel
configuration section group.
<diagnostics>
<messageLogging logMessagesAtTransportLevel="true"
logEntireMessage="true" />
</diagnostics>
C. In the machine configuration file, add the following XML segment to the system.serviceModel
configuration section.
<machineSettings enableLoggingKnownPii="true" />
Generate the ContosoService class using the Add Service Reference wizard.
Add the following code segment.
ContosoService client = new ContosoService();
client.Endpoint.Behaviors.Add(new CallbackDebugBehavior(true));
D. In the machine configuration file, add the following XML segment to the system.serviceModel
configuration section.
<machineSettings enableLoggingKnownPii="true" />
In the application configuration file, add the logKnownPii attribute to the message logging diagnostics
source and set the value of the attribute to true.
In the application configuration file, add the following XML segment to the system.serviceModel
configuration section group.
<diagnostics>
<messageLogging logMessagesAtTransportLevel="true"/>
</diagnostics>
Answer: D

certification Microsoft   070-521-Csharp   certification 070-521-Csharp   070-521-Csharp

NO.15 You are developing an application to update a user ¯ s soc i a l s t a t us . You need t o consu m e t he se r v i ce
using Windows Communication Foundation (WCF).
The client configuration is as follows.
<system.serviceModel>
<bindings>
<webHttpBinding>
<binding name="SocialConfig">
<security mode="TransportCredentialOnly">
<transport clientCredentialType="Basic"
?realm="Social API" />
</security>
</binding>
</webHttpBinding>
</bindings>
<client>
<endpoint address="http://contoso.com"
binding="webHttpBinding"
bindingConfiguration="SocialConfig"
contract="ISocialStatus"
name="SocialClient" />
</client>
</system.serviceModel>
The service contract is defined as follows.
[ServiceContract]
public interface ISocialStatus
{
[OperationContract]
[WebInvoke(UriTemplate =
"/statuses/update.xml?status={text}")]
void UpdateStatus(string text);
}
Which code segment should you use to update the social status?
A. using (WebChannelFactory<ISocialStatus> factory =
new WebChannelFactory<ISocialStatus>("SocialClient"))
{
factory.Credentials.UserName.UserName = user.Name;
factory.Credentials.UserName.Password = user.Password;
ISocialStatus socialChannel = factory.CreateChannel();
socialChannel.UpdateStatus(newStatus);
}
B. using (ChannelFactory<ISocialStatus> factory =
new WebChannelFactory<ISocialStatus>(typeof(ISocialStatus)))
{
factory.Credentials.UserName.UserName = user.Name;
factory.Credentials.UserName.Password = user.Password;
ISocialStatus socialChannel = factory.CreateChannel();
socialChannel.UpdateStatus(newStatus);
}
C. using (ChannelFactory<ISocialStatus> factory =
new ChannelFactory<ISocialStatus>("POST"))
{
factory.Credentials.Windows.ClientCredential.UserName =
user.Name;
factory.Credentials.Windows.ClientCredential.SecurePassword.
SetAt(0, Convert.ToChar(user.Password));
ISocialStatus socialChannel = factory.CreateChannel();
socialChannel.UpdateStatus(newStatus);
}
D. using (WebChannelFactory<ISocialStatus> factory =
new WebChannelFactory<ISocialStatus>(typeof(ISocialClient)))
{
factory.Credentials.Windows.ClientCredential.UserName =
user.Name;
factory.Credentials.Windows.ClientCredential.SecurePassword.
SetAt(0, Convert.ToChar(user.Password));
ISocialStatus socialChannel = factory.CreateChannel();
socialChannel.UpdateStatus(newStatus);
}
Answer: A

certification Microsoft   070-521-Csharp   070-521-Csharp

NO.16 You are creating a Windows Communication Foundation (WCF) service to process orders. The data
contract for the order is defined as follows.
[DataContract]
public class Order
{
[DataMember]
public string CardHolderName { get; set; }
[DataMember]
public string CreditCardNumber { get; set; }
}
You have the following requirements:
Enable the transmission of the contents of Order from the clients to the service.
Ensure that the contents of CreditCardNumber are not sent across the network in clear text.
Ensure that the contents of CreditCardNumber are accessible by the service to process the order.
You need to implement the service to meet these requirements.
What should you do?
A. Add a DataProtectionPermission attribute to the CreditCardNumber property and set the ProtectData
property to true.
B. Convert the DataContract to a MessageContract and set the ProtectionLevel property to
EncryptAndSign.
C. Change the data type of CreditCardNumber from string to SecureString.
D. Implement the CreditCardNumber property getter and setter. In the setter, run the value of the
CreditCardNumber through the MD5CryptoServiceProvider class TransformBlock method.
Answer: B

Microsoft   070-521-Csharp examen   070-521-Csharp   070-521-Csharp

NO.17 You are building a client for a Windows Communication Foundation (WCF) service.
You need to create a proxy to consume this service.
Which class should you use?
A. ChannelFactory<TChannel>
B. ServiceHost
C. ClientRuntime
D. CommunicationObject
Answer: A

certification Microsoft   certification 070-521-Csharp   070-521-Csharp   070-521-Csharp

NO.18 A Windows Communication Foundation (WCF) application uses a data contract that has several data
members.
You need the application to throw a SerializationException if any of the data members are not present
when a serialized instance of the data contract is deserialized.
What should you do?
A. Add the KnownType attribute to the data contract. Set a default value in each of the data member
declarations.
B. Add the KnownType attribute to the data contract. Set the Order property of each data member to
unique integer value.
C. Set the EmitDefaultValue property of each data member to false.
D. Set the IsRequired property of each data member to true.
Answer: D

certification Microsoft   070-521-Csharp   certification 070-521-Csharp

NO.19 You are creating a Windows Communication Foundation (WCF) service that implements operations in
a RESTful manner. You need to add a delete operation.
You implement the delete method as follows.
void DeleteItems(string id);
You need to configure WCF to call this method when the client calls the service with the HTTP DELETE
operation.
What should you do?
A. Add the WebInvoke(UriTemplate = "/Items/{id}", Method="DELETE") attribute to the operation.
B. Add the HttpDelete attribute to the operation.
C. Replace the string parameter with a RemovedActivityAction parameter.
D. Replace the return type with RemovedActivityAction.
Answer: A

Microsoft   070-521-Csharp   070-521-Csharp

NO.20 A Windows Communication Foundation (WCF) client uses the following service contract. (Line
numbers are included for reference only.)
01 [ServiceContract]
02 public interface IService
03 {
04 [OperationContract]
05 string Operation1();
06 [OperationContract]
07 string Operation2();
08 }
You need to ensure that all calls to Operation1 and Operation2 from the client are encrypted and signed.
What should you do?
A. Set the ProtectionLevel property in line 01 to EncryptAndSign.
B. Set the ProtectionLevel property in line 04 and line 06 to Sign.
C. Add a SecurityCriticalAttribute for each operation.
D. Add a SecuritySafeCriticalAttribute for each operation.
Answer: A

Microsoft   070-521-Csharp examen   certification 070-521-Csharp

Pass4Test a une grande équipe composée des experts d'expérience dans l'industrie IT. Leurs connaissances professionnelles et les recherches font une bonne Q&A, qui vous permet à passer le test Microsoft 070-521-Csharp. Dans Pass4Test, vous pouvez trouver une façon plus convenable à se former. Les resources de Pass4Test sont bien fiable. Choisissez Pass4Test, choisissez un raccourci à réussir le test Microsoft 070-521-Csharp.