Pass4Test est un site de provider les chances à se former avant le test Certification IT. Il y a de différentes formations ciblées aux tous candidats. C'est plus facile à passer le test avec la formation de Pass4Test. Parmi les qui ont déjà réussi le test, la majorité a fait la préparation avec la Q&A de Pass4Test. Donc c'est pourquoi, Pass4Test a une bonne réputation dansn l'Industrie IT.
Nous sommes clairs que ce soit necessaire d'avoir quelques certificats IT dans cette industrie de plus en plus intense. Le Certificat IT est une bonne examination des connaissances démandées. Dans l'Industrie IT, le test IBM 000-545 est une bonne examination. Mais c'est difficile à passer le test IBM 000-545. Pour améliorer le travail dans le future, c'est intélligent de prendre une bonne formation en coûtant un peu d'argent. Vous allez passer le test 100% en utilisant le Pass4Test. Votre argent sera tout rendu si votre test est raté.
Pass4Test peut vous fournir un raccourci à passer le test IBM 000-545: moins de temps et efforts dépensés. Vous trouverez les bonnes documentations de se former dans le site Pass4Test qui peut vous aider efficacement à réussir le test IBM 000-545. Si vous voyez les documentations dans les autres sites, c'est pas difficile à trouver qu''elles sont venues de Pass4Test, parce que lesquelles dans Pass4Test sont le plus complété et la mise à jour plus vite.
Code d'Examen: 000-545
Nom d'Examen: IBM (DB2 9.7 SQL Procedure Developer)
Questions et réponses: 109 Q&As
La population de la Certification IBM 000-545 est très claire dans l'Industrie IT. Pass4Test se contribue à vous aider à réussir le test, de plus, un an de la mise à jour gratuite pendant est gratuite pour vous. Pass4Test sera le catalyseur de la réalisation de votre rêve. Pour le succès demain, Pass4Test est votre von choix. Vous serez le prochain talent de l'Indutrie IT sous l'aide de Pass4Test.
On doit faire un bon choix pour passer le test IBM 000-545. C'est une bonne affaire à choisir la Q&A de Pass4Test comme le guide d'étude, parce que vous allez obtenir la Certification IBM 000-545 en dépensant d'un petit invertissement. D'ailleur, la mise à jour gratuite pendant un an est aussi gratuite pour vous. C'est vraiment un bon choix.
Si vous voulez ne se soucier plus à passer le test IBM 000-545, donc vous devez prendre la Q&A de Pass4Test comme le guide d'étude pendant la préparation de test IBM 000-545. C'est une bonne affaire parce que un petit invertissement peut vous rendre beaucoup. Utiliser la Q&A IBM 000-545 offerte par Pass4Test peut vous assurer à réussir le test 100%. Pass4Test a toujours une bonne réputation dans l'Industrie IT.
Pass4Test est un bon site d'offrir la facilité aux candidats de test IBM 000-545. Selon les anciens test, l'outil de formation IBM 000-545 est bien proche de test réel.
000-545 Démo gratuit à télécharger: http://www.pass4test.fr/000-545.html
NO.1 The CREATE OR REPLACE PROCEDURE statement is similar semantically to which of the following
combined statements?
A. DROP and CREATE PROCEDURE
B. ALTER and CREATE PROCEDURE
C. UPDATE and CREATE PROCEDURE
D. DROP and ALTER PROCEDURE
Answer: A
IBM 000-545 examen 000-545
NO.2 What is a reason to use SQL procedures in DB2?
A. to use different programming languages B. to reduce code sharing
C. to move business logic rules into the database
D. to eliminate the need for testing
Answer: C
IBM examen 000-545 000-545 000-545 000-545 examen
NO.3 Given the two SQL procedures shown below: What is the expected output if procedure S1 is invoked
with the value 1 provided for parameter V1?
A. NULL
B. 2
C. 5
D. 7
Answer: D
certification IBM 000-545 000-545 examen 000-545
NO.4 Click the Exhibit button.
Referring to the exhibit, how many rows will be returned by the SQL query shown below? SELECT *
FROM TABLE(getnumemployee(21?) AS dSELECT * FROM TABLE(getnumemployee(?21?) AS d
A.0
B.1
C.7
D.10
Answer: C
IBM 000-545 000-545
NO.5 Which statement is permitted within a scalar user-defined function body?
A. COMMIT
B. INSERT
C. SIGNAL
D. LOOP
Answer: C
certification IBM 000-545 000-545 examen certification 000-545
NO.6 Given the following SQL:
Which statement is incorrect?
A. The procedure declaration requires the DYNAMIC RESULT SETS 1 clause in order to return a result
set.
B. The cursor declaration requires the WITH RETURN TO CLIENT clause in order to return a result set.
C. The cursor declaration requires the WITH RETURN TO CALLER clause in order to return a result set.
D. The cursor declaration requires the WITH RETURN clause in order to return a result set.
Answer: A
IBM 000-545 000-545 000-545 examen
NO.7 Click on the Exhibit button.
Referring to the exhibit, what is the OUT_PHONENUMBERS result set when the SQL procedure is
invoked by the call statement shown below? CALL
find_customers(ARRAY[?16-305-3745? ?05-416-4565? ?16-305-3746? '905-414-4566'], ?16??)
A. [?16-305-3745??05-416-4565? ?16-305-3746']
B. [?16-305-3745??05-416-4565? ?16-305-3746? '905-414-4566']
C. [?05-416-4565? '905-414-4566']
D. [?16-305-3745? ?16-305-3746[?16-305-3745? ?16-305-3746?
Answer: D
IBM 000-545 000-545 examen 000-545
NO.8 Which SQL procedure declaration is coded correctly?
A. CREATE PROCEDUREmyproc(IN salary DOUBLE, OUT commission DOUBLE) BEGIN DECLARE
EXIT HANDLER FOR SQLEXCEPTION SET commission = 0; DECLARE my_cur CURSOR FOR
SELECT * FROM employee; DECLARE a DOUBLE; SET a = .06 * salary; SET commission = a; END
B. CREATE PROCEDUREmyproc(IN salary DOUBLE, OUT commission DOUBLE) BEGIN DECLARE
EXIT HANDLER FOR SQLEXCEPTION SET commission = 0; DECLARE a DOUBLE; DECLARE my_cur
CURSOR FOR SELECT * FROM employee; SET a = .06 * salary; SET commission = a; END
C. CREATE PROCEDUREmyproc(IN salary DOUBLE, OUT commission DOUBLE) BEGIN DECLARE a
DOUBLE; DECLARE EXIT HANDLER FOR SQLEXCEPTION SET commission = 0; DECLARE my_cur
CURSOR FOR SELECT * FROM employee; SET a = .06 * salary; SET commission = a; END
D. CREATE PROCEDUREmyproc(IN salary DOUBLE, OUT commission DOUBLE) BEGIN DECLARE a
DOUBLE; DECLARE my_cur CURSOR FOR SELECT * FROM employee; DECLARE EXIT HANDLER
FOR SQLEXCEPTION
SET commission = 0; SET a = .06 * salary; SET commission = a; END
Answer: D
IBM 000-545 000-545 000-545 certification 000-545
NO.9 If this statement was used to create an SQL procedure named P_EXIT:
A. 10
B. 20
C. 99
D. NULL
Answer: C
IBM 000-545 examen 000-545 certification 000-545 000-545 certification 000-545
NO.10 In the function shown below:
A. SELECT * FROMTABLE(fcn1('B01'))
B. SELECTTABLE(fcn1('B01')) FROM SYSIBM.SYSDUMMY1
C. SELECT * FROMfcn1('B01')
D. SELECTfcn1('B01') FROM SYSIBM.SYSDUMMY1
Answer: A
IBM examen 000-545 000-545 examen
NO.11 In the stored procedure below: What will the value of the P_ID parameter be if the procedure is
invoked and a value of 2 is specified for the START_VALUE parameter?
A. 1
B. 2
C. 3
D. 4
Answer: C
IBM 000-545 certification 000-545 000-545 certification 000-545
NO.12 The CREATE PROCEDURE statement shown below was executed against a database called MYDB.
CREATE PROCEDURE myschema.proc1(IN p1 INTEGER, OUT p2 CHAR(4), OUT p3 SMALLINT)
BEGIN SET p2 = 'abc'; END Which two CREATE PROCEDURE statements, when executed against the
same database, will succeed? (Choose two.)
A. CREATE PROCEDUREmyschema.proc1(IN p1 CHAR(4), OUT p2 INTEGER) BEGIN SET p2 = 123;
END
B. CREATE PROCEDUREmyschema.proc1(IN p1 INTEGER, OUT p2 CHAR(4), OUT p3 CHAR(4))
BEGIN SET p2 = 'abc'; END
C. CREATE PROCEDUREmyschema.proc1(IN p1 CHAR(4), OUT p2 INTEGER, OUT p3 SMALLINT)
BEGIN SET p2 = 123; END
D. CREATE PROCEDUREotherschema.proc1(IN p1 CHAR(4), OUT p2 CHAR(4), OUT p3 CHAR(4))
BEGIN SET p2 = 'abc'; END
E. CREATE PROCEDUREmyschema.proc1(IN p1 NUMBER, OUT p2 NUMBER, OUT p3 NUMBER)
BEGIN SET p2 = 'abc';END
Answer: A,D
IBM examen 000-545 000-545 000-545 examen certification 000-545
NO.13 A developer needs to create a user-defined function that will return a list of employees who work in a
particular department. Which statement will successfully create a function that meets this objective?
A. CREATE FUNCTIONdept_employees (deptno CHAR(3)) RETURNS TABLE LANGUAGE SQL
READS SQL DATA RETURN SELECT empno, lastname AS l_name, firstnme AS f_name FROM
employee WHERE employee.workdept = dept_employees.deptno
B. CREATE FUNCTIONdept_employees (deptno CHAR(3)) RETURNS TABLE DYNAMIC RESULT
SETS 1 LANGUAGE SQL READS SQL DATA DECLARE emp_info CURSOR WITH RETURN FOR
SELECT empno, lastname AS l_name, firstnme AS f_name FROM employee WHERE
employee.workdept = dept_employees.deptno OPEN emp_info; RETURN
C. CREATE FUNCTIONdept_employees (deptno CHAR(3)) RETURNS TABLE (empno CHAR(6),
l_nameVARCHAR(15), f_nameVARCHAR(12)) LANGUAGE SQL READS SQL DATA RETURN SELECT
empno, lastname AS l_name, firstnme AS f_name FROM employee WHERE employee.workdept =
dept_employees.deptno
D. CREATE FUNCTIONdept_employees (deptno CHAR(3)) RETURNS TABLE (empno CHAR(6),
l_nameVARCHAR(15), f_nameVARCHAR(12)) DYNAMIC RESULT SETS 1 LANGUAGE SQL READS
SQL DATA DECLARE emp_info CURSOR WITH RETURN FOR
SELECT empno, lastname AS l_name, firstnme AS f_name FROM employee WHERE
employee.workdept = dept_employees.deptno OPEN emp_info; RETURN
Answer: C
certification IBM 000-545 certification 000-545 000-545 000-545 examen
NO.14 Which statement correctly describes characteristics of external functions?
A. External functions cannot return tables.
B. All cursors opened within an external function should stay open until the database isquiesced.
C. Scratchpads can be used to allocate dynamic memory required for multiple function invocations.
D. Transactions can be terminated within external functions.
Answer: C
IBM 000-545 000-545 certification 000-545 certification 000-545 000-545
NO.15 A developer wants to code the following statements in an SQL procedure:
A. 1, 2, 3, 4
B. 2, 4, 3, 1
C. 3, 4, 2, 1
D. 4, 3, 2, 1
Answer: B
IBM 000-545 examen 000-545 000-545 000-545 certification 000-545
NO.16 Which CREATE PROCEDURE statement option should be used if you plan on issuing a DECLARE
GLOBAL TEMPORARY TABLE statement from within the SQL procedure body?
A. CONTAINS SQL
B. READS SQL DATA
C. MODIFIES SQL DATA
D. LANGUAGE SQL
Answer: C
IBM 000-545 000-545 examen certification 000-545 certification 000-545
NO.17 Click the Exhibit button.
A user-defined function was created using the statement shown in the exhibit. Which additional option can
be added to the CREATE FUNCTION statement to tell the optimizer that the function does not always
return the same results for a given argument value?
A. NO EXTERNAL ACTION
B. NOT FENCED
C. NOT DETERMINISTIC
D. STATIC DISPATCH
Answer: C
certification IBM 000-545 000-545 000-545 examen
NO.18 Which procedure demonstrates the correct use of dynamic SQL?
A. CREATE PROCEDURE update_count1 (INnew_count INTEGER, IN item_code INTEGER) BEGIN
DECLARE v_dynSQL VARCHAR(200); SET v_dynSQL = 'UPDATE stock SET quantity_on_hand=?
WHERE item_number=?'; PREPARE v_stmt1 FROM v_dynSQL; EXECUTE v_stmt1 USING new_count,
item_code; END
B. CREATE PROCEDURE update_count2 (INtab_name VARCHAR(128), IN new_count INTEGER, IN
item_code INTEGER) BEGIN DECLARE v_dynSQL VARCHAR(200); SET v_dynSQL = 'UPDATE ? SET
quantity_on_hand=? WHERE item_number=?'; PREPARE v_stmt1 FROM v_dynSQL; EXECUTE
v_stmt1 USING tab_name, new_count, item_code; END
C. CREATE PROCEDURE update_count4 (INtab_name VARCHAR(128), IN col_name1
VARCHAR(128), IN col_name2 VARCHAR(128), IN new_countINTEGER, IN item_code INTEGER)
BEGIN
DECLARE v_dynSQL VARCHAR(200); SET v_dynSQL = 'UPDATE ? SET ?=? WHERE ?=?'; PREPARE
v_stmt1 FROM v_dynSQL; EXECUTE v_stmt1 USING tab_name, col_name1, new_count, col_name2,
item_code; END
D. CREATE PROCEDURE update_count5 (INnew_count INTEGER, IN item_code INTEGER) BEGIN
DECLARE v_dynSQL VARCHAR(200); DECLARE v_col_name VARCHAR(128); SET v_col_name =
'item_number'; SET v_dynSQL = 'UPDATE stock SET quantity_on_hand=? WHERE ?=?'; PREPARE
v_stmt1 FROM v_dynSQL; EXECUTE v_stmt1 USING new_count, v_col_name, item_code; END
Answer: A
IBM examen 000-545 000-545 examen 000-545 examen certification 000-545
NO.19 Given the following SQL:
Which of the following statements is true?
A. The procedure declaration requires the DYNAMIC RESULT SETS 1 clause in order to return a result
set.
B. The cursor declaration requires WITH RETURN TO CLIENT clause in order to return a result set.
C. The cursor declaration requires WITH RETURN TO CALLER clause in order to return a result set.
D. The cursor declaration requires WITH RETURN clause in order to return a result set.
Answer: B
IBM 000-545 examen 000-545
NO.20 Which three optional clauses can be used when creating an external function? (Choose three.)
A. SCRATCHPAD
B. NOTEPAD
C. LANGUAGE
D. EXTERNAL NAME
E. DATABASEINFO
Answer: A,C,D
certification IBM 000-545 examen 000-545 examen 000-545 examen
Le test simulation IBM 000-545 sorti par les experts de Pass4Test est bien proche du test réel. Nous sommes confiant sur notre produit qui vous permet à réussir le test IBM 000-545 à la première fois. Si vous ne passe pas le test, votre argent sera tout rendu.
没有评论:
发表评论