Aujoud'hui, c'est une société de l'informatique. Beaucoup d'organisations peut provider l'outil de se former pour le test Certification HP HP0-Y36. Mais on doit admettre que ces site n'ont pas la capacité à offrir une bonne Q&A, elles sont généralement très vagues et sans les points. C'est loin d'attirer les attentions des candidats.
Le suucès n'est pas loin de vous une fois que vous choisissez le produit de Q&A HP HP0-Y36 de Pass4Test.
Le test HP HP0-Y36 peut bien examnier les connaissances et techniques professionnelles. Pass4Test est votre raccourci amené au succès de test HP HP0-Y36. Chez Pass4Test, vous n'avez pas besoin de dépenser trop de temps et d'argent juste pour préparer le test HP HP0-Y36. Travaillez avec l'outil formation de Pass4Test visé au test, il ne vous demande que 20 heures à préparer.
Pass4Test est un bon site qui provide la façon efficace à se former à court terme pour réussir le test HP HP0-Y36, c'est un certificat qui peut améliorer le niveau de vie. Les gens avec le Certificat gagent beaucoup plus que les gens sans Certificat HP HP0-Y36. Vous aurez une space plus grande à se développer.
Code d'Examen: HP0-Y36
Nom d'Examen: HP (Deploying HP Enterprise Networks)
Questions et réponses: 73 Q&As
HP0-Y36 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-Y36.html
NO.1 Which BGP attributes must be present in a BGP routing update? (Select three.)
A. community
B. MED
C. origin type
D. local preference
E. AS path
F. next hop
Answer: C,E,F
HP certification HP0-Y36 HP0-Y36 HP0-Y36 examen
NO.2 Click the Exhibit button.
A provider of MPLS services configures MPLS Layer-3 VPN services for two customers. Each customer
has three branch offices that will be interconnected. The address blocks chosen by the customers for
each site are:
The provider has established only four Multi-Protocol BGP peers as shown in the exhibit. PE-4 has no
customer connections. Neither MPLS L3VPN is functional. Which configuration steps are required if this
topology is to be operational for both customers.? (Select two.)
A. Create VPN instances Customer A and Customer B on PE-4.
B. Configure PE-4 as a route-reflector within the bgp l3vpn-family.
C. Configure PE-4 as a route-reflector within the ipv4-family vpnv4.
D. Configure PE-4 as a route-reflector within the ipv4-family vpn-instance Cust-A and vpn-instance
Customer B.
E. Configure PE-4 as a bgp route-reflector.
F. Configure MBGP peers for P-10, P-20, and P-30.
Answer: A,C
certification HP HP0-Y36 examen HP0-Y36 certification HP0-Y36
NO.3 Click the Exhibit button.
Router-1 and Router-2 are BGP peers. Router-2 and Router-3 are BGP peers. However, Router-3 has not
learned the 16.0.0.0/8 BGP route. How can you resolve this issue? (Select two.)
A. Enable IGP synchronization on all routers.
B. Prepend AS1 to the 16.0.0.0/8 route on Router-1.
C. Enable BGP peering between Router-1 and Router-3.
D. Adjust the local preference of 16.0.0.0/8 on Router-1.
E. Configure Router-2 as a route reflector and Router-1 and Router-3 as clients.
F. Establish a physical link between Router-1 and Router-3.
Answer: C,E
HP HP0-Y36 examen HP0-Y36 examen
NO.4 Click the Exhibit button.
A provider of MPLS services offers multiple types of MPLS-based VPNs to its customers. Provider Edge
router PE-1 directly connects to the following three customers:
What is the minimum number of LDP peers established on Router PE-1?
A. 1
B. 2
C. 3
D. 4
E. 5
Answer: B
certification HP HP0-Y36 examen HP0-Y36 HP0-Y36 examen
NO.5 Which characteristics of a Circuit Cross Connect (CCC) L2VPN distinguish it from the Martini or
Kompella versions? (Select two.)
A. It requires a stack of three MPLS labels.
B. It includes exactly two endpoints of the VPN.
C. It can operate with fewer than two MPLS labels.
D. It does not require any Label signaling.
Answer: C,D
HP examen HP0-Y36 HP0-Y36 examen HP0-Y36
NO.6 In the configuration of a Martini version L2VPN on two PE routers, which parameter must be identical?
A. S-VID
B. PW-ID
C. VLAN-ID
D. Service Instance number
E. VPN-Target
F. Remote LDP Peer IP address
Answer: B
HP HP0-Y36 HP0-Y36 certification HP0-Y36
NO.7 Click the Exhibit button.
A provider of MPLS services configures MPLS Layer-3 VPN services for two customers. Each customer
has three branch offices that will be interconnected. The address blocks chosen by the customers for
each site are:
The provider uses OSPF as its IGP with the Loopback 0 addresses shown as the OSPF router-id and the
MPLS LSR-ID. Customer A Site 1 successfully pings Customer A Site 2. This ICMP echo request is
captured on the Ethernet segment between routers P-10 and P-20. What is found on this packet capture?
(Select two.)
A. MPLS VPN label
B. VPN target
C. MPLS outer label corresponding to the LSR-ID of P-20
D. MPLS outer label corresponding to FEC 16.0.0.2
E. route distinguisher
Answer: A,D
HP examen HP0-Y36 HP0-Y36 HP0-Y36 HP0-Y36 examen
NO.8 Which parameters must be configured on two PE routers to provision an Ethernet L2VPN in Martini
mode? (Select four.)
A. PW-ID
B. LDP Remote Peer
C. VPN Instance
D. Service Instance
E. S-VID
F. L2VPN Address Family
G. Route Distinguisher
H. IP Binding
Answer: A,B,D,E
certification HP HP0-Y36 HP0-Y36 examen
NO.9 What can be included in BGP or multi-protocol BGP Network Layer Reachability Information (NLRI)?
(Select three.)
A. AS 65001
B. 10.0.0.0 /9
C. MED
D. Remote LDP Session
E. BGP ORF
F. VPN Target
G. VPLS Label Block
H. 6500:301:192.168.0.0 /16
Answer: B,G,H
HP examen HP0-Y36 HP0-Y36 examen HP0-Y36 HP0-Y36 examen HP0-Y36
NO.10 Which technology in an MPLS L2VPN can provide ordered delivery of Ethernet frames?
A. TCP-based L2VPN
B. Control Word
C. Ethernet raw access circuit
D. VLAN pseudowire class
E. MPLS EXP bits
Answer: B
certification HP certification HP0-Y36 HP0-Y36 examen HP0-Y36 examen HP0-Y36 HP0-Y36
Participer au test HP HP0-Y36 est un bon choix, parce que dans l'Industire IT, beaucoup de gens tirent un point de vue que le Certificat HP HP0-Y36 symbole bien la professionnalité d'un travailleur dans cette industrie.
没有评论:
发表评论