Il demande les connaissances professionnelles pour passer le test Citrix 1Y0-A11. Si vous manquez encore ces connaissances, vous avez besoin de Pass4Test comme une resourece de ces connaissances essentielles pour le test. Pass4Test et ses experts peuvent vous aider à renfocer ces connaissances et vous offrir les Q&As. Pass4Test fais tous efforts à vous aider à se renforcer les connaissances professionnelles et à passer le test. Choisir le Pass4Test peut non seulement à obtenir le Certificat Citrix 1Y0-A11, et aussi vous offrir le service de la mise à jour gratuite pendant un an. Si malheureusement, vous ratez le test, votre argent sera 100% rendu.
Pass4Test est un site de provider les chances à se former avant le test Certification IT. Il y a de différentes formations ciblées aux tous candidats. C'est plus facile à passer le test avec la formation de Pass4Test. Parmi les qui ont déjà réussi le test, la majorité a fait la préparation avec la Q&A de Pass4Test. Donc c'est pourquoi, Pass4Test a une bonne réputation dansn l'Industrie IT.
Pass4Test vous permet à réussir le test Certification sans beaucoup d'argents et de temps dépensés. La Q&A Citrix 1Y0-A11 est recherchée par Pass4Test selon les résumés de test réel auparavant, laquelle est bien liée avec le test réel.
Pass4Test a une grande équipe composée des experts d'expérience dans l'industrie IT. Leurs connaissances professionnelles et les recherches font une bonne Q&A, qui vous permet à passer le test Citrix 1Y0-A11. Dans Pass4Test, vous pouvez trouver une façon plus convenable à se former. Les resources de Pass4Test sont bien fiable. Choisissez Pass4Test, choisissez un raccourci à réussir le test Citrix 1Y0-A11.
But que Pass4Test n'offre que les produits de qualité est pour vous aider à réussir le test Citrix 1Y0-A11 100%. Le test simulation offert par Pass4Test est bien proche de test réel. Si vous ne pouvez pas passer le test Citrix 1Y0-A11, votre argent sera tout rendu.
Aujoud'hui, dans cette indutrie IT de plus en plus concurrentiel, le Certificat de Citrix 1Y0-A11 peut bien prouver que vous avez une bonne concurrence et une space professionnelle plus grande à atteindre. Dans le site Pass4Test, vous pouvez trouver un outil de se former très pratique. Nos IT experts vous offrent les Q&As précises et détaillées pour faciliter votre cours de préparer le test Citrix 1Y0-A11 qui vous amenera le succès du test Citrix 1Y0-A11, au lieu de traivailler avec peine et sans résultat.
Code d'Examen: 1Y0-A11
Nom d'Examen: Citrix (Basic Administration for Citrix NetScaler 9.0)
Questions et réponses: 86 Q&As
1Y0-A11 Démo gratuit à télécharger: http://www.pass4test.fr/1Y0-A11.html
NO.1 Scenario: An administrator must set up a NetScaler system network with USIP mode enabled. The
NetScaler must be able to preserve client IP addresses in TCP/IP packets reaching the back-end servers
except for connections coming from particular IP addresses that are defined in an ACL. In the case of
connections coming from the IP addresses defined in the ACL, the packets reaching the back-end servers
should receive the NetScaler IP address instead of the client IP address. On which entity should RNAT be
configured to meet the requirements in this scenario according to best practices?
A.ACL
B.Client
C.Virtual server
D.Back-end server
Answer:A
certification Citrix certification 1Y0-A11 certification 1Y0-A11
NO.2 A NetScaler system is running with high CPU usage frequently. Which log can the administrator view
to determine if the high CPU is being caused by the processes running in the user space?
A.syslog
B.nswlog
C.newnslog
D.nsconmsg
Answer:C
Citrix examen 1Y0-A11 examen 1Y0-A11 1Y0-A11
NO.3 Scenario: An administrator installed a NetScaler system and configured the NSIP and MIP for the
system. The NetScaler system will be used primarily for load balancing in this environment. Which
additional step must the administrator take to ensure that the NetScaler system can perform the
necessary server load balancing in this environment?
A.Disable USIP mode on both nodes
B.Use the MIP as the NSIP for a high availability environment
C.Create VIPs for the front-end connections to the back-end servers
D.Enable USNIP mode for the front-end connections to the back-end servers
Answer:C
Citrix examen certification 1Y0-A11 1Y0-A11 1Y0-A11 1Y0-A11
NO.4 An administrator has just enabled caching and wants to make sure that this will positively impact server
performance. Which information can the administrator get from the Dashboard to determine whether
server performance was positively affected by enabling caching?
A.Client connection count increases
B.Server side request rate increases
C.Client connection count decreases
D.Server side request rate decreases
Answer:D
Citrix certification 1Y0-A11 1Y0-A11 examen 1Y0-A11 1Y0-A11 examen
NO.5 Scenario: A multinational company operates in areas where there is significant threat of natural
disaster. The administrator decides to create redundancy in their network because of a continuous power
outage threat at the South America site. The company also has two sites in North America, one near New
York and the other near the San Andreas fault line, a site of frequent earthquakes and tremors. The
company also has a site in Tokyo, Japan, which experiences several natural disaster threats. The
company plans to use a NetScaler system for load balancing and to prevent interruption of network
services because of a local natural or human disaster. Would a high availability (HA) deployment resolve
the issue described in the scenario, and if so, how should the HA nodes be paired? Click the Task button
to answer. Click the Exhibit button for instructions on how to complete a Drag and Drop item. Answer &
Explanation Correct Answer Explanations No more information available
Answer:
NO.6 Scenario: An administrator is planning on configuring health checks for services bound to web servers 1
and 2 which are listening on TCP port 80 for HTTP and TCP port 443 for HTTPS. Service1 receives the
encrypted traffic and Service 2 receives the clear text traffic. How should the administrator create the
monitor for Service1 using the command line interface?
A.set mon monitor-SVC1-Mon TCP -secure YES
B.add lb mon monitor-SVC1-Mon HTTP -secure YES
C.set mon monitor-SVC1-Mon HTTP -transparent NO
D.add lb mon monitor-SVC1-Mon TCP -transparent NO
Answer:B
certification Citrix 1Y0-A11 certification 1Y0-A11 certification 1Y0-A11 certification 1Y0-A11
NO.7 A company is planning on implementing NetScaler systems in high availability pairs. Which entry in the
NS.CONF file of the secondary system needs to be unique from those of the primary system?
A.VMAC
B.VIP address
C.MIP address
D.NSIP address
Answer:D
Citrix certification 1Y0-A11 1Y0-A11 examen 1Y0-A11
NO.8 Scenario: An administrator needs to create a health check that will mark an HTTP service down if the
bound monitor probe fails. The administrator wants to create a monitor and configure the health check so
that a trap is sent if the monitor probe reply exceeds 20 milliseconds. How can the administrator create
the monitor for this health check using the command line interface?
A.set mon monitor-HTTP-1 HTTP -interval 20 milli
B.add lb mon monitor-HTTP-1 HTTP -interval 20 milli
C.set mon monitor-HTTP-1 HTTP -resptimeout 20 milli
D.add lb mon monitor-HTTP-1 HTTP -resptimeout 20 milli
Answer:D
Citrix examen 1Y0-A11 1Y0-A11 certification 1Y0-A11 1Y0-A11 examen
NO.9 Scenario: An administrator set up a NetScaler system in a one-arm mode configuration with high
availability. The system failed over unexpectedly. Which two occurences could be causing this issue?
(Choose two.)
A.An interface is down
B.Layer 2 mode is disabled
C.An SSL acceleration card is down
D.The heartbeat is being sent every two seconds
Answer:A C
certification Citrix 1Y0-A11 1Y0-A11 examen 1Y0-A11 examen
NO.10 An administrator configured cache redirection and needs to provide a report of how that feature is
functioning in the network environment. What can the administrator use to see a graphical representation
of the statistics for the vserver performing the cache redirection?
A.The monitor view for the service bound to the correct vserver
B.The chart option in the Dashboard once the correct vserver is selected
C.The chart option in the Dashboard for the service bound to the correct vserver
D.The request and response rates option in the Dashboard once te correct vserver is selected
Answer:B
certification Citrix certification 1Y0-A11 1Y0-A11 1Y0-A11 1Y0-A11
NO.11 An administrator notices that the CPU usage on a NetScaler system spikes for aproximately one
minute every two days. Which step can the administrator take to find out what is causing the spike?
A.View the syslog
B.Run events on newnslog
C.View the Dashboard statistics
D.Run the stat ns node command
Answer:B
Citrix 1Y0-A11 1Y0-A11
NO.12 An administrator should configure Link Aggregation on a 7000 NetScaler system when __________.
(Choose the correct option to complete the sentence.)
A.redundancy on a half duplex operation is required
B.redundancy on an operation across multiple data rates is required
C.the bandwidth requirements inbound to or outbound from the Netscaler are greater than 1 Gb/sec
D.the bandwidth requirements inbound to or outbound from the Netscaler are greater than 8 Gb/sec
Answer:C
Citrix certification 1Y0-A11 1Y0-A11 1Y0-A11
NO.13 Scenario: A network administrator is deploying a NetScaler system in an environment with a single
subnet using this IP information: subnet: 192.168.10.32 netmask: 255.255.255.224 default gateway:
192.168.10.40 The administrator already set up the NSIP and MIP addresses using the command line
interface. Which command could the administrator use to complete this set up successfully?
A.add route 0.0.0.0 0.0.0.0 192.168.10.32
B.add route 0.0.0.0 0.0.0.0 192.168.10.40
C.add route 0.0.0.0 0.0.0.0 192.168.10.62
D.add route 192.168.10.0 255.255.255.224 192.168.10.32
E.add route 192.168.10.0 255.255.255.224 192.168.10.62
Answer:B
Citrix examen 1Y0-A11 1Y0-A11 examen 1Y0-A11 examen
NO.14 How can an administrator configure a health check for a server receiving HTTP traffic so that it monitors
the responses of the server to actual client requests as opposed to probes whenever possible?
A.Use the default TCP monitor
B.Configure an HTTP-ECV monitor
C.Configure an HTTP-Inline monitor
D.Use the TCP monitor with the transparent parameter selected
E.Configure an HTTP monitor with the transparent parameter selected
Answer:C
Citrix examen 1Y0-A11 examen 1Y0-A11 certification 1Y0-A11
NO.15 Scenario: An administrator is planning the necessary configurations on a NetScaler system for an
environment that requires the NetScaler system to advertise virtual IP addresses, directly connected
routes and static routes on the upstream routers. What must the administrator ensure is configured on the
NetScaler system for this environment?
A.Static Routes
B.Link Load Balancing
C.Route Health Injection
D.Front-end Health Check
Answer:C
Citrix 1Y0-A11 certification 1Y0-A11
NO.16 Where in the configuration utility can an administrator configure a NetScaler high availability pair to
ensure that specific interfaces are NOT monitored?
A.The root of the System node
B.The root of the Network node
C.The interface sub node in the System node
D.The interface sub node in the Network node
Answer:D
Citrix 1Y0-A11 1Y0-A11
NO.17 Which event would trigger a failover in a high availability pair?
A.The primary appliance reboots.
B.A forced synchronization event fails.
C.A monitored interface fails on the secondary node.
D.The default gateway does not return a heartbeat packet from the primary node.
Answer:A
certification Citrix 1Y0-A11 examen 1Y0-A11
NO.18 Which SNMP trap must an administrator configure to be informed when the response time for a monitor
probe that had exceeded the set threshold returns to normal?
A.entityup
B.entitydown
C.monRespTimeoutAboveThresh
D.monRespTimeoutBelowThresh
Answer:D
Citrix examen 1Y0-A11 examen 1Y0-A11
NO.19 The primary node of a NetScaler high availability (HA) pair failed over immediately at start up during
the initial testing of the system. Which configuration step can the administrator take to prevent this from
happening again?
A.Disable monitoring on all connected interfaces
B.Enable node monitoring on all primary node interfaces
C.Run the "force HA sync" command from the primary node
D.Execute the "disable interface" command for all unused interfaces
Answer:D
certification Citrix 1Y0-A11 certification 1Y0-A11
NO.20 An SNMP manager attempted to poll for an OID but received the error message: "response timeout."
Which option could the administrator have misconfigured for SNMPv2 to cause this error message?
A.SNMP trap
B.SNMP user
C.SNMP group
D.SNMP community
Answer:D
Citrix examen 1Y0-A11 1Y0-A11
Pass4Test est un seul site web qui peut offrir toutes les documentations de test Citrix 1Y0-A11. Ce ne sera pas un problème à réussir le test Citrix 1Y0-A11 si vous préparez le test avec notre guide d'étude.
没有评论:
发表评论