Le matériel de formation de l'examen de meilleur Juniper JN0-360

Le programme de formation Juniper JN0-360 offert par Pass4Test comprend les exercices et les test simulation. Vous voyez aussi les autres sites d'offrir l'outil de formation, mais c'est pas difficile à découvrir une grand écart de la qualité entre Pass4Test et les autres fournisseurs. Celui de Pass4Test est plus complet et convenable pour la préparation dans une courte terme.

Finalement, la Q&A Juniper JN0-360 plus nouvelle est lancé avec tous efforts des experts de Pass4Test. Aujourd'hui, dans l'Industrie de IT, si on veut se renforcer sa place, il faut se preuve la professionnalité aux les autres. Le test Juniper JN0-360 est une bonne examination des connaissances professionnelles. Avec le passport de la Certification Juniper, vous aurez un meilleur salaire et une plus grande space à se développer.

Les spécialiste profitant leurs expériences et connaissances font sortir les documentations particulière ciblées au test Juniper JN0-360 pour répondre une grande demande des candidats. Maintenant, la Q&A plus nouvelle, la version plus proche de test Juniper JN0-360 réel est lancée. C'est possible à réussir 100% avec le produit de Juniper JN0-360. Si malheureusement, vous ne passez pas le test, votre argent sera tout rendu. Vous pouvez télécharger le démo gratuit en Internet pour examiner la qualité de Q&A. N'hésitez plus d'ajouter le produit au panier, Pass4Test peut vous aider à réussir le rêve.

Beaucoup de travailleurs dans l'Industrie IT peut obenir un meilleur travail et améliorer son niveau de vie à travers le Certificat Juniper JN0-360. Mais la majorité des candidats dépensent beaucoup de temps et d'argent pour préparer le test, ça ne coûte pas dans cette société que le temps est tellement précieux. Pass4Test peut vous aider à économiser le temps et l'effort pendant le cours de la préparation du test Juniper JN0-360. Choisir le produit de Pass4Test particulier pour le test Certification Juniper JN0-360 vous permet à réussir 100% le test. Votre argent sera tout rendu si malheureusement vous ne passez pas le test.

Pour vous laisser savoir mieux que la Q&A Juniper JN0-360 produit par Pass4Test est persuadante, le démo de Q&A Juniper JN0-360 est gratuit à télécharger. Sous l'aide de Pass4Test, vous pouvez non seulement passer le test à la première fois, mais aussi économiser vos temps et efforts. Vous allez trouver les questions presque même que lesquels dans le test réel. C'est pourquoi tous les candidats peuvent réussir le test Juniper JN0-360 sans aucune doute. C'est aussi un symbole d'un meilleur demain de votre carrière.

Pass4Test est un bon site qui provide la façon efficace à se former à court terme pour réussir le test Juniper JN0-360, c'est un certificat qui peut améliorer le niveau de vie. Les gens avec le Certificat gagent beaucoup plus que les gens sans Certificat Juniper JN0-360. Vous aurez une space plus grande à se développer.

Code d'Examen: JN0-360
Nom d'Examen: Juniper (Juniper Networks Certified Internet Specialist (JNCIS-SP))
Questions et réponses: 252 Q&As

JN0-360 Démo gratuit à télécharger: http://www.pass4test.fr/JN0-360.html

NO.1 What are Martian addresses on a Junos device?
A. IP addresses that are reserved for use only with MPLS VPNs.
B. IP addresses that are never installed in the routing table.
C. IP addresses that are reserved for use only with GRE tunnels.
D. IP addresses specifically used for out-of-band management.
Answer: A

certification Juniper   JN0-360 examen   JN0-360   certification JN0-360   JN0-360 examen   JN0-360 examen
7. Which statement correctly describes the difference between a generated and an aggregate
route?
A. An aggregate route can be a supernet whereas generated routes are classful.
B. A generated route has a forwarding next hop that is inherited from a contributing route.
C. An aggregate route has a forwarding next hop that is inherited from a contributing route.
D. Only aggregate routes can be re-advertised through BGP using a policy.
Answer: B

Juniper   certification JN0-360   certification JN0-360
8. Which statement is true regarding the default master routing instance?
A. All IPv4 routes in the master routing instance are shared with user-defined routing instances.
B. Interface routes in the master routing instance are shared with user-defined routing instances.
C. Routes in the master routing instance are not shared with user-defined routing instances.
D. All routes in the master routing instance are shared with user-defined routing instances.
Answer: C

Juniper   JN0-360   certification JN0-360   JN0-360   JN0-360 examen   JN0-360 examen
9. Which routing table contains the route information for the user-defined routing instance
called Candidate1?
A. inet.Candidate1.0
B. Candidate1.inet.0
C. inet.0
D. Candidate1-inet.0
Answer: B

certification Juniper   JN0-360   JN0-360 examen   JN0-360   certification JN0-360
10. Which two routing-instance types are used for non-VPN-related applications? (Choose two.)
A. virtual-router
B. vrf
C. forwarding
D. vpls
Answer: A,C

Juniper   JN0-360   JN0-360   JN0-360   JN0-360

NO.2 Which two statements are true about MPLS VPNs? (Choose two.)
A. With Layer 3 VPNs, the provider's routers participate in the customer's Layer 3 routing.
B. MPLS VPNs are designed to run over private networks rather than the public Internet.
C. With Layer 2 VPNs, the provider does not participate in the routing of the customer's private IP
traffic.
D. MPLS VPN tunnels are always encrypted.
Answer: B,D

Juniper examen   certification JN0-360   JN0-360   certification JN0-360

NO.3 Which Junos platform supports provider bridging?
A. T Series devices
B. SRX Series devices
C. MX Series devices
D. MAG Series devices
Answer: D

certification Juniper   certification JN0-360   JN0-360   JN0-360   JN0-360

NO.4 Which label operation is performed by an MPLS transit router?
A. inject
B. pop
C. push
D. swap
Answer: A

certification Juniper   certification JN0-360   JN0-360   certification JN0-360   certification JN0-360

NO.5 In which environment would you run BGP?
A. a company spread across multiple floors of a building
B. a company with a single office
C. a home network
D. the public Internet
Answer: C

certification Juniper   certification JN0-360   JN0-360   certification JN0-360   JN0-360

NO.6 For a network running single-area OSPF, how would you decrease the size of the link-state
database (LSDB)?
A. Implement RIP as an overlay protocol on all devices.
B. Add more devices to the OSPF network to help with LSDB processing.
C. Reduce the frequency of hello timers throughout the network.
D. Implement OSPF areas.
Answer: B

certification Juniper   JN0-360 examen   JN0-360   JN0-360   certification JN0-360   JN0-360

Si vous traviallez dur encore pour préparer le test de Juniper JN0-360 et réaliser votre but plus vite, Pass4Test peut vous donner une solution plus pratique. Choisir la Q&As de Pass4Test qui vous assure que c'est pas un rêve à réussir le test Juniper JN0-360.

L'avènement de la certification Juniper pratique d'examen JN0-360 questions et réponses

Votre vie changera beaucoup après d'obtenir le Certificat de Juniper JN0-360. Tout va améliorer, la vie, le boulot, etc. Après tout, Juniper JN0-360 est un test très important dans la série de test Certification Juniper. Mais c'est pas facile à réussir le test Juniper JN0-360.

Il y a plusieurs de façons pour réussir le test Juniper JN0-360, vous pouvez travailler dur et dépenser beaucoup d'argents, ou vous pouvez travailler plus efficacement avec moins temps dépensés.

Pass4Test possède un l'outil de formation particulier à propos de test Juniper JN0-360. Vous pouvez améliorer les techniques et connaissances professionnelles en coûtant un peu d'argent à courte terme, et vous preuver la professionnalité dans le future proche. L'outil de formation Juniper JN0-360 offert par Pass4Test est recherché par les experts de Pass4Test en profitant les expériences et les connaissances riches.

Vous pouvez télécharger tout d'abord le démo gratuit pour prendre un essai. Vous serez confiant davantage sur Pass4Test après l'essai de démo. Vous allez réussir le test Juniper JN0-360 sans aucune doute si vous choisissez le Pass4Test.

Code d'Examen: JN0-360
Nom d'Examen: Juniper (Juniper Networks Certified Internet Specialist (JNCIS-SP))
Questions et réponses: 252 Q&As

Vous pouvez télécharger tout d'abord une partie de Q&A Certification Juniper JN0-360 pour tester si Pass4Test est vraiment professionnel. Nous pouvons vous aider à réussir 100% le test Juniper JN0-360. Si malheureusement, vous ratez le test, votre argent sera 100% rendu.

Si vous êtes intéressé par l'outil formation Juniper JN0-360 étudié par Pass4Test, vous pouvez télécharger tout d'abord le démo. Le service de la mise à jour gratuite pendant un an est aussi offert pour vous.

JN0-360 Démo gratuit à télécharger: http://www.pass4test.fr/JN0-360.html

NO.1 Which Junos operational mode command is used to verify that load balancing is working as expected?
A.show route all
B.show route extensive
C.show route balancing
D.show route forwarding-table
Answer: D

Juniper   JN0-360   JN0-360 examen

NO.2 Click the Exhibit button
Based on the illustration of the VPLS topology shown in the exhibit, which statement is true?
A.PE-C must have a spanning-tree protocol enabled
B.CE-C must have BGP enabled
C.Traffic forwarded from PE-C to PE-A is forwarded on to PE-B
D.Traffic forwarded from PE-C to PE-A is not forwarded on to PE-B
Answer: D

Juniper   certification JN0-360   JN0-360

NO.3 Click the Exhibit button
You work for the regional Internet service provider shown in the exhibit You have a partial BGP table and
are receiving a 10 100/16 route from your upstream ISP You have been asked to configure a default route
that can be sent to your downstream customer This route should forward customer traffic toward your
upstream Tier 11SP as long as the 10.100/16 route is present.
What would accomplish this goal?
A.Create and announce an aggregate default route
B.Create and announce a static default route with a next-hop of discard
C.Create and announce a static default route with a next-hop of reject
D.Create and announce a generated default route
E.Create an advertise-map with exist-map
Answer: E

Juniper examen   JN0-360   JN0-360

NO.4 Which IS-IS packet is used to determine the level of an IS-IS neighbor?
A.IIH
B.LSP
C.PSNP
D.CSNP
Answer: A

Juniper   JN0-360   JN0-360 examen   JN0-360 examen

NO.5 You must configure an OSPF area that does not accept type 3 link-state advertisements (LSAs) from
area 0 (other than the default route) You have configured your area to be stub, but you still see type 3
LSAs.
What will account for this behavior?
A.You should have configured your area as totally stubby
B.You should have used a not-so-stubby-area
C.You are experiencing a routing loop
D.You have exported routes into OSPF
Answer: A

Juniper   JN0-360 examen   certification JN0-360   JN0-360 examen   JN0-360

NO.6 Which two statements describe differences between IPv4 and IPv6.? (Choose two)
A.IPsec is built into IPv6
B.IPv6 uses a 32-bit (4-byte) address and can support up to 4,294,967,296 addresses
C.IPv4 supports extension headers whereas IPv6 options are integrated into the base
D.IPv6 eliminates the need for NAT
Answer: AD

certification Juniper   certification JN0-360   JN0-360

NO.7 Which role does the router ID (RID) have in the BGP route selection process?
A.The router ID is evaluated immediately after MED to determine route preference
B.The router ID is evaluated last in the route selection process
C.The router ID is evaluated after the cluster length and a lower router ID is chosen
D.The router ID is evaluated after analyzing the IGP metric cost
Answer: C

certification Juniper   JN0-360   JN0-360   JN0-360

NO.8 Click the Exhibit button
Referring to the network illustrated in the exhibit, how does router A reach destinations in area 49.2222?
A.Router A will use the routes from area 49.2222; it learns from router B
B.Router A will see the attached bit from router B and create a default route
C.Router A must have a default route manually configured
D.Router A will receive a default route in the IS-IS update from router B
Answer: B

Juniper   JN0-360   certification JN0-360   JN0-360

NO.9 Which BGP state denotes a fully operational session?
A.Established
B.Active
C.Operational
D.Connect
Answer: A

certification Juniper   JN0-360 examen   JN0-360   JN0-360 examen

NO.10 What is the function of the hop limit field in the IPv6 header?
A.It limits the diameter of the network to 20 hops
B.It sets the number of hops in the network to be equal to the MPLS header time-to-live (TTL)
C.It replaces the time-to-live (TTL) field in IPv4
D.It represents future extensibility to the protocol
Answer: C

Juniper   certification JN0-360   JN0-360 examen   JN0-360 examen   JN0-360

NO.11 Which two values displayed in the output from the show spanning-tree MSTP configuration command
must match on all switches participating in the same MSTP region? (Choose two)
A.root bridge identifier
B.authentication checksum
C.context identifier
D.configuration digest
Answer: CD

certification Juniper   JN0-360   certification JN0-360   JN0-360   JN0-360   JN0-360 examen

NO.12 You have recently implemented a graceful Routing-Engine switchover (GRES) and want to further
reduce down time if a Routing Engine (RE) failure occurs.
Which two features can be configured on this device to reduce its downtime in this situation? (Choose
two)
A.VRRP
B.GR
C.BFD
D.NSR
Answer: B D

Juniper   certification JN0-360   JN0-360   certification JN0-360   JN0-360 examen

NO.13 You have been asked to configure an IPv6 address for a group of interfaces that could belong on
different routers. If a packet is sent to that address, it should be received by all routers in the group.
Which address type would be suited for these requirements?
A.Unicast
B.Multicast
C.Anycast
D.Broadcast
Answer: B

certification Juniper   JN0-360   JN0-360 examen

NO.14 You are logged into a router and have navigated to the (edit routing-options] level of the hierarchy. You
have been asked to create a static route that will use 10.10.10.1 as its primary next-hop and 10.10.10.5
as its secondary next-hop.
Which command correctly configures this scenario?
A.set static route 8/8 10.10.10.1 qualified-next-hop 10.10.10.5 pref 10
B.set static route 8/8 next-hop 10.10.10.1 secondary-next-hop 10.10.10.5 preference 10
C.set static route 8/8 next-hop 10.10.10.1 qualified-next-hop 10.10.10.5 preference 10
D.set static route 8/8 next-hop [10.10.10.1 10.10.10.5] pref 10
Answer: C

Juniper   JN0-360   JN0-360 examen   certification JN0-360   certification JN0-360

NO.15 You are logged into a router and have navigated to the [edit routing-options] level of the hierarchy. You
have been asked to create a static route that will use 43 18 7 1 as its primary next-hop and 76 1310 2 as
its secondary next-hop.
Which command correctly configures this setup?
A.set static route 0/0 76.13.10.2 qualified-next-hop 43.18.7.1 pref 10
B.set static route 0/0 next-hop 43.18.7.1 secondary-next-hop 76.13.10.2 preference 10
C.set static route 0/0 next-hop [76.13.10.2 10.10.10.5] pref 10
D.set static route 0/0 next-hop 43.18.7.1 qualified-next-hop 76.13.10.2 preference 10
Answer: D

Juniper   JN0-360   JN0-360   certification JN0-360   JN0-360

NO.16 You have been asked to define a default gateway for traffic leaving a router. This route should use
interface so-0/0/0 as its next-hop.Which type of route would be suited for this scenario?
A.a static route
B.a generated route
C.a martian route
D.an aggregate route
Answer: A

Juniper   JN0-360   certification JN0-360   JN0-360 examen

NO.17 Router A is an OSPF router connected to both Area 0 and Area 1 Area 1 has been configured as a stub
area Which two LSA types does Router A suppress from Area 1 ?
A.Router LSA
B.External LSA
C.Summary LSA
D.ASBR Summary LSA
Answer: B D

Juniper   JN0-360   JN0-360   JN0-360

NO.18 Click the Exhibit button
In the exhibit, OSPF routers R1, R2, R3, and R4 come up, in order, at 1-minute intervals
Which router will be the designated router?.
A.R1
B.R2
C.R3
D.R4
Answer: A

certification Juniper   JN0-360   JN0-360   JN0-360

NO.19 What are two valid actions that can be applied to a frame by a Layer 2 firewall filter?
(Choose two)
A.Log
B.loss-priority
C.sample
D.count
Answer: BD

Juniper   certification JN0-360   JN0-360 examen

NO.20 You have configured an IP-IP tunnel between Router A and Router B
Which Junos operational mode command is used to verify that the tunnel interface is up and operational?
A.show chassis tunnel status
B.show tunnel interface
C.show interfaces terse
D.show interfaces tunnel
Answer: C

Juniper   JN0-360   JN0-360 examen   JN0-360

Vous aurez une assurance 100% à réussir le test Juniper JN0-360 si vous choisissez le produit de Pass4Test. Si malheuresement, vous ne passerez pas le test, votre argent seront tout rendu.